How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask chester298 Your Own Question
Category: General
Satisfied Customers: 792
Type Your Question Here...
chester298 is online now
A new question is answered every 9 seconds

I have a Touch-tronic 2000, Singer. The zig zag stich has

Customer Question

I have a Touch-tronic 2000, Singer. The zig zag stich has stopped working. Can this be repaired?
Submitted: 1 year ago.
Category: General
Expert:  chester298 replied 1 year ago.
Hi and welcome to Just answer.Initially, try to open the face plate cover and get your aerosol lubricant (for sewing machine) do not use wd40. Then spray the needle mechanism area specially those collars and moving parts. Let it penetrate for at a minute and try to do a zigzag. If still, use the hair blower to melt the old grease then spray again. Just control the heat and avoid melting the plastic parts.Note: Please do not give negative rating, that is not helpful on both of us it just destroy my overall performance. Just reply.
Hope this information will be helpful.IMPORTANT: RATING IS REQUIRED!! If you are satisfied to my answer please don't forget to rate,,EXCELLENT OR GOOD rating and BONUS are greatly appreciated...
Customer: replied 1 year ago.

where is the face plate?

Expert:  chester298 replied 1 year ago.
Face plate is in the front (head) of the machine where the needle bar mechanism found.