How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask chester298 Your Own Question
chester298
chester298,
Category: General
Satisfied Customers: 792
69243481
Type Your Question Here...
chester298 is online now
A new question is answered every 9 seconds

We replace the top screen because the machine fell and is

Customer Question

we replace the top screen because the machine fell and is giving us a error E302 and the machine does not work help please
Submitted: 1 year ago.
Category: General
Expert:  chester298 replied 1 year ago.

Hi and welcome to Just answer.

Initially, may I know what is the make and model of your machine?

Customer: replied 1 year ago.

yuki cp180

DDL-9000B-SS

Expert:  chester298 replied 1 year ago.

E302 is confirmation of tilt of machine head

When tilt of machine head sensor is OFF.

What exactly you replaced? the entire head or the screen only?

Customer: replied 1 year ago.

just the computer screen that sits on top of the head

Expert:  chester298 replied 1 year ago.

I think you forgot the connector to connect or that is loose connection. Or maybe the tilt sensor is damaged also.

Customer: replied 1 year ago.

there is only one plug and we did put it right were is the tilt sensor or how do we reset it to normal

Expert:  chester298 replied 1 year ago.

May I request you a sample photo of the parts that you replaced.

To send photo, click the paper clip icon at the top of your typing box, click browse,select file then click Ok.

Customer: replied 1 year ago.
Expert:  chester298 replied 1 year ago.

Thanks for the photo. However I want to see the old parts you replace and focus to the connector please. Thank you.

Also please try to remove the screws that hold into it and try to make it straight.

Expert:  chester298 replied 1 year ago.

Hi

I'm just following up with you to see how everything is going. Did my answer help?

Let me know,
Chester

Customer: replied 1 year ago.

We apreciate your help but in the end we had to hire a local mechanic to come and reprogram the whole machine and it turn out to be a lot harder than we thought but thanks anyway

Expert:  chester298 replied 1 year ago.

Thank you for your response.

If you think my time and effort deserve a positive feedback, I greatly appreciate your positive rating.