How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Electronic Engineer
Category: General
Satisfied Customers: 17265
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your Question Here...
Pete is online now
A new question is answered every 9 seconds

I have a Pfaff creative vision 5.5 new in box. When moving

Customer Question

I have a Pfaff creative vision 5.5 new in box. When moving the movers dropped embroidery arm on concrete. Bent the plastic around where it connects to the machine. It will work sometimes, but can I get a used one to replace the dropped one as I would like to sell the whole machine. Would it have to be worked on if were replaced to make them both comp able? Thank you. Beverly
Submitted: 1 year ago.
Category: General
Expert:  Pete replied 1 year ago.
Hi there Beverly,Yes, you can get the replacement parts from: the machine has been dropped quite hard then it will likely need some adjustment or even a complete service to ensure it runs smoothly.Pete.

Related General Questions