How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask chester298 Your Own Question
Category: General
Satisfied Customers: 792
Type Your Question Here...
chester298 is online now
A new question is answered every 9 seconds

I just bought a used Pfaff. It was serviced before i got

Customer Question

Hi, I just bought a used Pfaff creative sesation. It was serviced before i got it but it was also sent UPS. Not sure what could have happened with the freight. All the computer works. The straight stitches work as well as most of the simple stitches. When you go to sew the flowers the flower does not line up. Part of it drops leaving the pattern completely wrong. It is kind of like the pattern is stretched out at the end of the flower leaving the middle of the flower at the end of a petal with a gap in between. I hope that makes sense to you. Hearts look like leaves.

Submitted: 1 year ago.
Category: General
Expert:  chester298 replied 1 year ago.
If you already try to descale your machine but no water comes out. It sounds like you have clog air on the water line/pump system. Try to manually prime your machine, for instruction just COPY/PASTE this link it supports all gaggia and seaco models.Sometimes you need to get rough on your machine in able to remove the clog air on water line. slamming the water tank into machine sometimes help. If still, unplug your machine, remove water and turn the machine upside down or shake your machine if possible.Let me know if you still have questions.Hope this information will be helpful.IMPORTANT: If you are satisfied to my answer please don't forget to rate,,GOOD OR EXCELLENT rating and BONUS are greatly appreciated...