Ask Experts & Get Answers to Your Questions - ASAP
Hi and welcome to Just answer.
Initially, try to open your machine face cover to access the needle mechanism. Look at the shaft and if it is bent you have to replace the shaft. If not look at the shaft screw if it is loose try to tighten it.
If you are using zigzag or embroidery before the needle shaft is not came back to home position. You need to lubricate the mechanism use the aerosol spray for sewing machine then go back to zigzag mode and test it with few stitches then try to back in straight stitch.
Hope this information will be helpful.
IMPORTANT: RATING IS REQUIRED! If you are satisfied to my answer please don't forget to rate,,GOOD OR EXCELLENT rating and BONUS are greatly appreciated...
the shaft is not bent. it has a spring pulling it to the left. I don't see how to adjust it.
Can you please give a screen shot of that particular area?
To send photo:
Click the paper clip icon, browse then select file then ok.
I am just following up to see how everything is going. Did my answer help?
Please let me know,