How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask chester298 Your Own Question
Category: General
Satisfied Customers: 792
Type Your Question Here...
chester298 is online now
A new question is answered every 9 seconds

I have a Saeco Xelesis. Water is droplets leak out of seams

Customer Question

I have a Saeco Xelesis. Water is droplets leak out of seams of the horizontal cylinder of the steam wand and after extended use of the wand steam comes out.
Submitted: 2 years ago.
Category: General
Expert:  chester298 replied 2 years ago.

Hi and welcome to Just answer.

Initially, it sounds like you have a blown seal, much like an o-ring, some where in the wand connection. If you can dis-assemble the device, voiding any remaining warranty by the way, you can try to just clean the o-ring area and it may become usable for another year at the most. Contact the vendor if possible for an OEM replacement o-ring so that it matches in size and thickness correctly.

Hope this information will be helpful.

IMPORTANT: RATING IS REQUIRED!! If you are satisfied to my answer please don't forget to rate,,EXCELLENT OR GOOD rating and BONUS are greatly appreciated...