How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask chester298 Your Own Question
Category: General
Satisfied Customers: 792
Type Your Question Here...
chester298 is online now
A new question is answered every 9 seconds

I have a gaggia titanium. The brew unit was stuck. I followed

Customer Question

I have a gaggia titanium. The brew unit was stuck. I followed video instructions to fix it. However it won't go back in the machine--I believe mainly because within the machine the teeth that connect with the wheel in the brew unit are not properly aligned. What can I do?
Submitted: 2 years ago.
Category: General
Expert:  chester298 replied 2 years ago.
Hi and welcome to Just answer.

Initially, when your brew group was force to remove (not normal procedure) your brew group mechanism still in close position so you are not able to go back in.

You need to set your brew group to neutral position and the brew unit mechanism should move to open position for you to go back your brew unit in.

You need to block the brew unit sensor and close the door, your machine thinks that there is a brew group attached, power ON your machine and wait until the machine completely booted up and until the mechanism move to open.

Please watch this video on how for your reference. CLICK HERE

Hope this information will be helpful.

IMPORTANT: RATING IS REQUIRED!! If you are satisfied to my answer please don't forget to rate,,EXCELLENT OR GOOD rating and BONUS are greatly appreciated...
Expert:  chester298 replied 2 years ago.

I'm just following up with you to see how everything is going. Did my answer help?

Let me know,

Related General Questions