General

Ask Experts & get answers to your questions - ASAP

Connect one-on-one with {0} who will answer your question

Related General Questions
My Magnifica coffee machine has seized up. It has happened
My Magnifica coffee machine has seized up. It has happened before and the machine was sent back to the shop and replaced. I would like to see if I can fix this myself this time. The cogs inside have g… read more
Expert
Expert
We have a 7570 machine that has jammed, it appears to be a
We have a 7570 machine that has jammed, it appears to be a small dog engaged into the bobbin to prevent same from turning. Is the small led in the bobbin door a safety mechanism. Thanks Regards Geoff… read more
Expert
Expert
how to replace the on/off switch on hoover aquamaster s4470
1. How to replace the power cable on the hoover aquamaster s4470 vacuum cleaner? 2. How to replace the on/off switch on hoover aquamaster s4470 vacuum cleaner?… read more
Expert
Expert
I have a Lily Husqvarna 540 I do not use it constantly when
I have a Lily Husqvarna 540 I do not use it constantly when i do after a short length of time it suddenly jams. On the first 2 occasions I have paid for a service and it has returned ok, now it has go… read more
Expert
Expert
Hi, We have a Dyson DC 25 and the carpet beater has stopped
Hi, We have a Dyson DC 25 and the carpet beater has stopped turning. Have had it out and checked it is clear but still no luck. Any suggestions.… read more
Expert
Expert
I have an almost brand new PC-210 that the (sew button) is
I have an almost brand new PC-210 that the green (sew button) is red and nothing clears it??… read more
Expert
Expert
Keep getting message "Remove thread jam under the stitch plate"
Keep getting message "Remove thread jam under the stitch plate" when the foot control is pressed. No thread under stitch plate. Needle and bobbin just threaded. Feed dogs up or feed dogs down has no d… read more
MNMALE47
MNMALE47
Consultant
Vocational, Technical or Trade Scho
415 satisfied customers
I have a Hoover UH70120 vacuum cleaner with a non-functional
I have a Hoover UH70120 vacuum cleaner with a non-functional cord retraction mechanism. I admit that I pulled out the cord too far, and now it will not retract. I am trying to disassemble the vacuum c… read more
MNMALE47
MNMALE47
Consultant
Vocational, Technical or Trade Scho
415 satisfied customers
I have a miele TT500 vacuum about 2 years old just stopped
I have a miele TT500 vacuum about 2 years old just stopped working - everything fine inside (bag,filter etc) checked fuse. Any ideas of anything else I can try?… read more
MNMALE47
MNMALE47
Consultant
Vocational, Technical or Trade Scho
415 satisfied customers
My machine keeps on jamming with bunched threads in the
My machine keeps on jamming with bunched threads in the bobbin area. I've taken apart the mechanism and ther is no change. When I observe the thread from the top seems to be going behind the bobbin ca… read more
MNMALE47
MNMALE47
Consultant
Vocational, Technical or Trade Scho
415 satisfied customers
Hello, our Miele vacuum sound like something has got stuck
Hello, our Miele vacuum sound like something has got stuck in the engine (not sure how) -- it runs very slowly and noisily, like it is about to seize up, and emits a burning smell so we are not using … read more
Expert
Expert
I have a Hoover LINX cordless vacuum that is not picking up
I have a Hoover LINX cordless vacuum that is not picking up dirt. I have ensured that the dirt cup is empty, the filter is clean, the baffle tube is clear and the airpath free. The suction seems stron… read more
Expert
Expert
Janome Schoolmate s-3015 reverse button doesnt work.
Janome Schoolmate s-3015 reverse button doesn't work. How do I fix it? I have used them multiple times here at school . Like normal we stop sewing, hold down the reverse button and then instead of it … read more
Expert
Expert
I have a Brother 770II, it is not working correctly. The message
I have a Brother 770II, it is not working correctly. The message error when turned on say to press the needle position button to raise the needle. When pushing this button it does not work.… read more
Expert
Expert
I have an NS30 limited edition, I was in the middle of sewing
I have an NS30 limited edition, I was in the middle of sewing and tried to change the stitch but it keeps showing an E8 error. I cleaned it, turned it off then back on but nothing has fixed the proble… read more
Zeke
Zeke
Owner of Sales & Repair etc Business
Vocational, Technical, Trade School
354 satisfied customers
I have a Janome Memory Craft 6600 that I love, however there
I have a Janome Memory Craft 6600 that I love, however there is a recurring problem that I can't seem to get fixed. After I have been sewing along, using the cutting tool, I will need to change the bo… read more
Zeke
Zeke
Owner of Sales & Repair etc Business
Vocational, Technical, Trade School
354 satisfied customers
I have a Bernina 910 Electronic that I bought used. It sews
I have a Bernina 910 Electronic that I bought used. It sews nicely, but occasionally it just stops and I have to pull out the cord and push it in and wiggle it to get it going again. Is this a fatal p… read more
Expert
Expert
1979 Bally Paragon I have had this machine for five years
1979 Bally Paragon I have had this machine for five years and it has worked fine. A few months ago, it began intermittently tilting during play, even when it had not been shaken. (Previously, the tilt… read more
Expert
Expert
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

P. Simmons

P. Simmons

Attorney

213 satisfied customers

45 years old, retired Marine Officer, current attorney

Kim D.

Kim D.

Consultant

34 satisfied customers

Researcher 25 yrs in small and large institutions

SuperiorConsultant

SuperiorConsultant

Internet Researcher

21 satisfied customers

BBA, serving as Marketing Executive and interested in tourism,sports, and anything and everything!

Michael

Michael

Librarian

4,004 satisfied customers

20+ years as information professional

Cher

Cher

Educator-40+ yrs

1,892 satisfied customers

M.A., B.A., Author, Information & Research Specialist

A. Schuyler

A. Schuyler

Research Analyst

1,194 satisfied customers

30 years in research

Joan

Joan

Internet Researcher

567 satisfied customers

I believe that knowledge is Power! I would like to try to share my knowledge with others.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x