General

Ask Experts & get answers to your questions - ASAP

Connect one-on-one with {0} who will answer your question

Related General Questions
When I release the presser bar the presser foot of my Pfaff
when I release the presser bar the presser foot of my Pfaff Creative 1473 does not come down or comes down very slow… read more
Expert
Expert
Have a Pfaff 7570 and the presser foot does not consistently
Have a Pfaff 7570 and the presser foot does not consistently return to the down position after using the lifter. It seems to be a mechanical issue since it operates the same without any power applied.… read more
briansew
briansew
189 satisfied customers
The pressure foot on my Pfaff 145 is stuck in the up position.
The pressure foot on my Pfaff 145 is stuck in the up position. Normally, after you positioned the needle bar in the just moving down position, you could lift the lever on the back side of the machine … read more
briansew
briansew
189 satisfied customers
I have an Elna Lotus, mechanical, very old. It runs like a
I have an Elna Lotus, mechanical, very old. It runs like a top, but the lever that lifts the presser foot has broken. Where can I get another one so it can be replaced. The user manual covers zz's, ts… read more
briansew
briansew
189 satisfied customers
My Janome DC3030 machine does not lift the sewing foot very
My Janome DC3030 machine does not lift the sewing foot very high so I cannot get two layers of denim underneath - even with the black lever raised up. Am I doing something wrong?… read more
Expert
Expert
Kenmore model 385 15243I recently cleaned and oiled my sewing
Kenmore model 385 15243 I recently cleaned and oiled my sewing machine. Now the presser foot will only lift a very small amount. I have taken off the cover trying to see if there is an adjustment I ca… read more
Expert
Expert
Hi, I have an old Elna SU Air Electronic which has been great. How
Hi, I have an old Elna SU Air Electronic which has been great. How do you best re-synchronize the bobbin mounting when the plastic drive gear has been replaced, which I have just done successfully? I … read more
briansew
briansew
189 satisfied customers
Thank you for your response to my initial problem with my Hobbylock
Thank you for your response to my initial problem with my Hobbylock 788 serger. I haven't got back till now as I had to find needles. Machine is now threaded but will not make stitches. Does not even … read more
briansew
briansew
189 satisfied customers
White 534 Superlock serger. Need to replace looper gear (nylon
White 534 Superlock serger. Need to replace looper gear (nylon over steel, nylon cracked). Does the shaft have flats to aid in gear and arm radial positioning (timing)? I have the factory gauge tool t… read more
briansew
briansew
189 satisfied customers
I have an elna 7000 electronic computer sewing machine. I
I have an elna 7000 electronic computer sewing machine. I used the machine a week ago. today when I started sewing the needle moved from side to side a couple of times and the upper thread breaks imme… read more
MNMALE47
MNMALE47
Operations Manager/Repair Technician
Vocational, Technical or Trade Scho
626 satisfied customers
Hello, My sewing foot doesnt go down properly anymore. It
Hello, My sewing foot doesn't go down properly anymore. It hovers about 5mm above any fabric I want to sew together. How can I get the pressure back on so that it sits tightly on the fabric? It would … read more
briansew
briansew
189 satisfied customers
Hi, I have bought a Husqvarna Huskylock 910 - second hand but
Hi, I have bought a Husqvarna Huskylock 910 - second hand but the machine has never been used. It was very dirty and unoiled, so I have oiled where metal touches metal (where I can see) but the pressu… read more
MNMALE47
MNMALE47
Operations Manager/Repair Technician
Vocational, Technical or Trade Scho
626 satisfied customers
I have a P{faff 1132 which has sewn well for several years
I have a P{faff 1132 which has sewn well for several years .I recently tried to hem a pair of jeans with aregular needle and the bobbin thread which sewed smoothly on my test scrap knotted and the nee… read more
Expert
Expert
I have a Janome MC 10000. the automatic needle threader is
I have a Janome MC 10000. the automatic needle threader is not working. I would not go up so I jiggled it and it went up. I turn the shaft with the screw driver. I can get it to come down manually, bu… read more
Zeke
Zeke
Owner of Sales & Repair etc Business
Vocational, Technical, Trade School
354 satisfied customers
I have an option to purchase a Elna 900 DCX serger. It appears
I have an option to purchase a Elna 900 DCX serger. It appears to have never been used. I do not see much on the internet about this model, which concerns me. Is this a reliable model? What year was t… read more
briansew
briansew
189 satisfied customers
I have a Brother Star 130E sewing m/c which has been working
I have a Brother Star 130E sewing m/c which has been working well as long as I use straight or zigzag stitch, with the appropriate foot. But I had occasion to use the zipper foot today and found that … read more
MNMALE47
MNMALE47
Operations Manager/Repair Technician
Vocational, Technical or Trade Scho
626 satisfied customers
I just purchased a Singer Fashion mate 5500. It sewed beautifully
I just purchased a Singer Fashion mate 5500. It sewed beautifully for a week. tonight I sat down to sew and the thing keeps jamming, will not sew and gives me a "C4" error. No where in the book can I … read more
Zeke
Zeke
Owner of Sales & Repair etc Business
Vocational, Technical, Trade School
354 satisfied customers
How do I repair the pressor foot that goes down slowly and
How do I repair the pressor foot that goes down slowly and does not stay down to hold the fabric - Creative 7570 machine?… read more
Zeke
Zeke
Owner of Sales & Repair etc Business
Vocational, Technical, Trade School
354 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

P. Simmons

P. Simmons

Attorney

243 satisfied customers

45 years old, retired Marine Officer, current attorney

Kim D.

Kim D.

Consultant

34 satisfied customers

Researcher 25 yrs in small and large institutions

SuperiorConsultant

SuperiorConsultant

Internet Researcher

21 satisfied customers

BBA, serving as Marketing Executive and interested in tourism,sports, and anything and everything!

Scott

Scott

MIT Graduate

333 satisfied customers

MIT Graduate, United States Traveler, Information Finder

Cher

Cher

Educator-40+ yrs

1,919 satisfied customers

M.A., B.A., Author, Information & Research Specialist

A. Schuyler

A. Schuyler

Research Analyst

1,317 satisfied customers

30 years in research

Joan

Joan

Internet Researcher

567 satisfied customers

I believe that knowledge is Power! I would like to try to share my knowledge with others.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x