General

Ask Experts & get answers to your questions - ASAP

Connect one-on-one with {0} who will answer your question

Related General Questions
The door lock on my front load washer won't open. I just did
I just did all of this with a guy named Tyler, paid my 5 dollars and I have been waiting to get matched for 15 minutes … read more
SarahH830
SarahH830
Global Sales Manager
Bachelor of Science
1 satisfied customers
I have a brother embroidery machine. getting the message
I have a brother embroidery machine. getting the message "needle case motor has been locked" book says to "push close". that is not working. any other advise?… read more
Expert
Expert
My Theatre of Magic display has only horizontal lines (no
My Theatre of Magic display has only horizontal lines (no vertical display lines and it isn't the display itself. I changed it out and had the same results. I tightened all 3 ribbon cable connectors t… read more
Expert
Expert
My viking 300 sewing machine is saying the foot is wrong on
my viking 300 sewing machine is saying the foot is wrong on the computer panel and will not let the foot down to sew . I took it to repair and they said it was a motor problem but it seem more like a … read more
Expert
Expert
My Saeco Minuto Model HD8772 will not complete the descaling
My Saeco Minuto Model HD8772 will not complete the descaling cycle, and is stuck in the rinse mode. I have just kept running water through it, as that seems to be the only advice. I have seen the repa… read more
Expert
Expert
I recently turned on a Bernina 1230 after several years without
I recently turned on a Bernina 1230 after several years without use. The light came on briefly then went out. There is still power at the outlet as I ran an old Cub 3 on the same one to do the job I n… read more
Expert
Expert
I have been told that a Bernina 200/730 machine I bought on
I have been told that a Bernina 200/730 machine I bought on ebay has a little rust inside and the reversal motor,that enables button holes, etc., is no good. It works after "tight" adjustment but may … read more
Expert
Expert
My Juki DDL5550 keeps going off while I am sewing. If I turn
My Juki DDL5550 keeps going off while I am sewing. If I turn it off and wait a few minutes it usually will come back on when I press the on button then I have been able to sew again. Now it comes on (… read more
Expert
Expert
We have a KLEENMAID KAW793W 3050 Top Load Washing Machine. It
We have a KLEENMAID KAW793W 3050 Top Load Washing Machine. It is now 15 years old and we find that it is not agitating correctly. Instead of alternate rotations, ie backward and forwards, it tends to … read more
Expert
Expert
We have a Janome HD-3000. It will only operate in reverse.
We have a Janome HD-3000. It will only operate in reverse. When we push the reverse button, no change of direction takes place.… read more
MNMALE47
MNMALE47
Operations Manager/Repair Technician
Vocational, Technical or Trade Scho
626 satisfied customers
bought a used consew 206rb 1 nd when i try to sew it goes in
bought a used consew 206rb 1 nd when i try to sew it goes in reverse and i have to hold the lever up to go forward also will not sew… read more
MNMALE47
MNMALE47
Operations Manager/Repair Technician
Vocational, Technical or Trade Scho
626 satisfied customers
I have an E1 error displayed on my eXcellence 720 (Elna 7300).
I have an E1 error displayed on my eXcellence 720 (Elna 7300). This occured after thread got caught in the 2 belts on the right side of the machine. I removed the side panel and released the threads f… read more
Expert
Expert
I have a Model CS-6000i Brothers sewing machine with less than
I have a Model CS-6000i Brothers sewing machine with less than 2 hours of use. After three stitches is jams and an error message E-6 apprears. I have cleared any threads from the bobbin housing 10 or … read more
MNMALE47
MNMALE47
Operations Manager/Repair Technician
Vocational, Technical or Trade Scho
626 satisfied customers
I have a memory craft 9000. It has had consistent problems--
I have a memory craft 9000. It has had consistent problems-- when it begins to sew, it makes an awful noise often as soon as you turn it on. It was fixed 2 years ago and the motherboard was replaced. … read more
Expert
Expert
I have a New Home Memory Craft 4000. Never had any problems,
I have a New Home Memory Craft 4000. Never had any problems, til now. The feed dogs are not performing correctly. The stitch length goes from correct to not moving and just now, it would not go forwar… read more
Zeke
Zeke
Owner of Sales & Repair etc Business
Vocational, Technical, Trade School
354 satisfied customers
I finally found the part for the Babylock serger BL-426. I
I finally found the part for the Babylock serger BL-426. I sat down to enjoy some serging and absolutely no power. I took the foot pedal in and it tested fine. What should I look for? no lights, no no… read more
Expert
Expert
I have a Bernina 910 Electronic that I bought used. It sews
I have a Bernina 910 Electronic that I bought used. It sews nicely, but occasionally it just stops and I have to pull out the cord and push it in and wiggle it to get it going again. Is this a fatal p… read more
Expert
Expert
The translite bulbs all went out at the same time on my Getaway high
The translite bulbs all went out at the same time on my Getaway"high speed 2" pinball machine. However during multi ball the several flashers on the cop cars still work. I thought this must be a fuse … read more
Expert
Expert
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

P. Simmons

P. Simmons

Attorney

213 satisfied customers

45 years old, retired Marine Officer, current attorney

Kim D.

Kim D.

Consultant

34 satisfied customers

Researcher 25 yrs in small and large institutions

SuperiorConsultant

SuperiorConsultant

Internet Researcher

21 satisfied customers

BBA, serving as Marketing Executive and interested in tourism,sports, and anything and everything!

Michael

Michael

Librarian

4,004 satisfied customers

20+ years as information professional

Cher

Cher

Educator-40+ yrs

1,892 satisfied customers

M.A., B.A., Author, Information & Research Specialist

A. Schuyler

A. Schuyler

Research Analyst

1,194 satisfied customers

30 years in research

Joan

Joan

Internet Researcher

567 satisfied customers

I believe that knowledge is Power! I would like to try to share my knowledge with others.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x