Ford

Have Ford questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Ford Questions
Throwing p0003 and p0091 codes crank no start. Keeps blowing
Throwing p0003 and p0091 codes crank no start. Keeps blowing fuse 72 … read more
Bart
Bart
Master Automotive Technician
High School Diploma
2,976 satisfied customers
F350 6.7 with codes po546, p242d,p2455, p0672, p0627. F350
F350 6.7 with codes po546, p242d,p2455, p0672, p0627 … read more
WallaceC821
WallaceC821
Service/Parts Manager
Associates Applied Science - Automotive
14 satisfied customers
I have a 2004 f350 6.0 diesel will crank but not fire ihave
i have a 2004 f350 6.0 diesel will crank but not fire ihave 48v on ficm doesnt drop below 47 icp is going to 1200psi when cranking the ipr is at 47%. when doing an injector buzz test it will rattle 3 … read more
donjcook
donjcook
Lead Technician
207 satisfied customers
I have a 2008 f350 6.4 and it wont start but cranks. The
I have a 2008 f350 6.4 and it wont start but cranks. The fuel gage saids is empty with diesel but it has half a tank the high pressure pump psi is 4490. What can be the problem i have only one code b2… read more
Chris (aka- Moose)
Chris (aka- Moose)
Ford Technician
Vocational, Technical or Trade School
34,605 satisfied customers
1991 FORD F350 7.3 NO START COLD OR AFTER SITTING HAVE POWER
1991 FORD F350 7.3 NO START COLD OR AFTER SITTING HAVE POWER TO GLOW PLUGS FUEL SHUT OFF SWITCH REPLACED GLOW PLUG CONTROLLER… read more
Scott
Scott
Diesel, Automatic trans, full line tech
Associate Degree
3,947 satisfied customers
i need a fuse diagram for a 1999 f350 diesel i am not getting
i need a fuse diagram for a 1999 f350 diesel i am not getting fire to fuel pump on frame and glow plug light in dash does not light up ...truck wont crank when pump is hot wired either… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
27,281 satisfied customers
F350: We have a 2008 F350 Harley with the 6.4L diesel - Just
We have a 2008 F350 Harley with the 6.4L diesel - Just replaced high pressure fuel pump. cleared adaptive tables - has almost 6000 psi fuel pressure cranking, oil level good and clean - cranks fast an… read more
James
James
Bachelors degree automotive technology with minor in diesel
3,584 satisfied customers
99 ford f350: cranks..glow plug relay is working.. fuel pump runs.when
99 ford f350 7.3 liter diesel. truck cranks, will not start. glow plug relay is working.. fuel pump runs.when cranking relay in the dash (center)is chattering and doesn't start.previously replaced the… read more
Fordanswerman
Fordanswerman
Ford Senior Master Technician retired
Associate Degree
3,304 satisfied customers
99 ford f350: cranks..glow plug relay is working.. fuel pump runs.when
99 ford f350 7.3 liter diesel. truck cranks, will not start. glow plug relay is working.. fuel pump runs.when cranking relay in the dash (center)is chattering and doesn't start.previously replaced the… read more
SuperBob
SuperBob
Ford dealer senior master technician
Vocational, Technical or Trade Scho
2,603 satisfied customers
Ford F350: cranks..the gem module, fuse box and windshield..ran fine
Question on Ford F350 99 Diesel: 7.3 liter, Truck cranks, but will not start. Just replaced the gem module, fuse box and windshield two weeks ago. Truck ran fine after that. Truck ran fine for one day… read more
John Crouch
John Crouch
lead senior master tech
Vocational, Technical or Trade Scho
1,840 satisfied customers
2003 ford f350: 6.0 diesel..cranks fine , tries to fire but than dies
cold starting problem on 2003 ford f350 6.0 diesel . cranks fine , tries to fire but than dies . glow plugs new , once it dose start runs bad untill it gets up to running tempature . changed fuel filt… read more
Bamaman39
Bamaman39
Ford master diesel Tech.Ford certified
High School or GED
2,287 satisfied customers
2006 F350: crank..wont turn..The fuel pump and oil pump I
my 2006 F350 6.0 will crank but wont turn over. The fuel pump and oil pump I just replaced. Any ideas? Is this a common problem?… read more
marcpod
marcpod
Own collision repair service
Vocational, Technical or Trade Scho
1,707 satisfied customers
1997 f350: im getting alot of white smoke..already changed
1997 f350 7.3 . im getting alot of white smoke when i start the truck i already changed the gpr what could it be… read more
Fordanswerman
Fordanswerman
Ford Senior Master Technician retired
Associate Degree
3,304 satisfied customers
1996 ford: 7.3 diesel..exhaust..fuel filter light came on and it died
1996 ford 7.3 diesel f350. po340 cam sensor code and po472 exhaust back pressure code. Replaced cam sensor ran for a while but again the fuel filter light came on and it died. Have replaced fuel filte… read more
Dieseljunky2
Dieseljunky2
Locomotive Mechanic
Ford Certified Technician
3,612 satisfied customers
Ford F350: mod 87 with 6.9 / 7.3 liter, parked the car after a day
Hello, I have a Ford F350 mod 87 with 6.9 / 7.3 liter, parked the car after a day of driving. Should start the day after, the engine runs runt but it does not seem to include the diesel, the suggestio… read more
Dennis
Dennis
Senior Master A Technician/Shop Foreman
Vocational, Technical or Trade Scho
758 satisfied customers
2002 f350: wont start..fuel pump..it cranks it sputters soot
my 2002 f350 had sudden loss of power the other mourning . when i returned to my truck it just cranked over but wont start.i replaced the fuel pump thinking it wasnt getting any fuel but it still wont… read more
howard
howard
Associate Degree
30 satisfied customers
2002 f350: glow plug light goes out, I..cranking..fuel filter..exhaust
2002 f350 7.3 diesel, engine has been harder to start over time, about 100k miles, after glow plug light goes out, I crank the engine, no start, then the glow plug light comes back on while cranking. … read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
27,281 satisfied customers
Ford f350: im having..its corroded..having trouble starting
im having troulbe locating it to see if its corroded my ford f350 diesel is having trouble starting… read more
Don - Mo Lurch
Don - Mo Lurch
Owner
Vocational, Technical or Trade Scho
11,760 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

27,281 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Ford Technician

34,605 satisfied customers

24 years of experience diagnosing & repairing

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

12 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

2,651 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,558 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x