Ford

Have Ford questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Ford Questions
Brakes on 1992 F350 2 wheel drive (dually) The master cyl is
Brakes on 1992 F350*****(dually) The master cyl is new, the booster is new, the vacuum pump is new. The front calipers, shoes and rotors are new. Rear brakes are fairly new. No leaks. The brakes are s… read more
Eric
Eric
Retired
N/A
38,477 satisfied customers
I have a 94 ford f250. I replaced all brake lines, wheel
I have a 94 ford f250. I replaced all brake lines, wheel cylinders, calipers, rotors and booster with cylinder attached. I still have brakes that when I depress the pedal I have to pump it to get good… read more
Mike V.
Mike V.
Auto Service Technician
Subaru and Nissan factory training.
1,994 satisfied customers
f-350: I have a 1992 Ford F-350 pickup 2W drive. Changed
I have a 1992 Ford F-350 pickup 2W drive. Changed caliper and bleed both sides. Nice a solid when engine off and when I start the engine and put on the brakes they slowly keep going down. What do you … read more
ZZDaryl
ZZDaryl
Lead Auto Tech
Some college and advanced training
11,485 satisfied customers
Ford Mondeo: T reg 24v mondeo. Complete brake failure luckily
T reg 24v mondeo. Complete brake failure luckily leaving home so stopped with hand brake. Master cylinder? or are there other possible causes?… read more
Edward
Edward
Professional at Justanswer.com
Associate Degree
4,129 satisfied customers
I have a 99 Expedition with brake issues. Replaced the
I have a 99 Expedition with brake issues. Replaced the master cylinder, bled out to clear new fluid at all 4 wheels. pedal is firm with motor off. When I start the engine, the pedal goes to floor. Put… read more
Edward
Edward
Professional at Justanswer.com
Associate Degree
4,129 satisfied customers
ford expedition: master cylinder..bled..leaks..pedal still bleeds
02 ford expedition 4.6. Front rotors replaced, rear rotors turned within specs, all pads replaced, master cylinder replaced and all air bled out, no visible fluid leaks but pedal still bleeds down wit… read more
Edward
Edward
Professional at Justanswer.com
Associate Degree
4,129 satisfied customers
Ford: brake pedal went to floor when accelerator..hill..leaks
Ford E450 Superduty 6.8L: brake pedal went to floor when accelerator was applied with foot still on brake at top of hill. Pedal did eventually come back. No leaks noted anywhere in system. Disc breaks… read more
Eric
Eric
Retired
N/A
38,477 satisfied customers
97 f150: 2wd..I went to put on the brakes, the pedal nearly went
I have a 97 F150 2wd truck. I was driving and when I went to put on the brakes, the pedal nearly went to the floor. It has some brake function but the travel is almost gone and I am not driving it now… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
31,725 satisfied customers
88 f350: brakes work..they go to the floor is this my master cylinder
hello i have a 88 f350 at times the brakes work great and other times they go to the floor is this my master cylinder?… read more
Randall C
Randall C
Auto Technician / Consultant
Vocational, Technical or Trade Scho
13,501 satisfied customers
2001 ford taurus: brake pedal goes..5mph..put brake fluid..light went
my 2001 ford taurus won't brake. the brake pedal goes all the way to the floor, but doesn't stop the car unless i'm going around 5mph. At one time, the brake light was on, my neighbor told me to put b… read more
Dieseljunky2
Dieseljunky2
Locomotive Mechanic
Ford Certified Technician
3,589 satisfied customers
What is the right way to bleed the brakes on a 2000 ford ranger
What is the right way to bleed the brakes on a 2000 ford ranger w/abs? With the motor running or not abs unplugged, or what??? Tkxxxxxxx Bob… read more
Rudolph Diesel
Rudolph Diesel
Service manager/ Master mechanic
Vocational, Technical or Trade Scho
1,918 satisfied customers
1983 Ford F250: The pedal..engaging..fluid leak..master cylinder
my breaks are not working on my 1983 Ford F250. The pedal is going to the floor and not engaging the breaks. There is no break fluid leak and the master cylinder is full. What could the problem be?… read more
Eric
Eric
Retired
N/A
38,477 satisfied customers
2002 f150: booster..master cylinder..bled..the brake pedal, the pedal
my brakes went out on my 2002 f150, i changed the power booster and the master cylinder and the brake sensor, i have bled the cylinders alot, i have air bubbling in the resivoir when i pump the brake … read more
Steve
Steve
Service Manager/ Technician
5,473 satisfied customers
1990 F350: brakes..bled..master cylinder..the pedal still drops
Hello. I have a 1990 F350 Diesel UHaul truck that has no brakes. I replaced and bled the master cylinder and bled all the lines in the correct order and the pedal still drops to the floor. I see no le… read more
Brad B
Brad B
Mechanic
Vocational, Technical or Trade School
1,091 satisfied customers
1997 F250: clutch..pedal..gears grinding , but it easily shifts
My 1997 F250 Diesel, manual trans is having problems shifting. The clutch only disengages in the last 1" of pedal travel. I can rarely shift into reverse without the gears grinding , but it easily shi… read more
SuperBob
SuperBob
Ford dealer senior master technician
Vocational, Technical or Trade Scho
2,603 satisfied customers
Ford f350: van..the truck the brake pedal goes almost to the floor
I have a ford f350 high cube van with a 5.8 engine. every since I've had the truck the brake pedal goes almost to the floor when the motor is running. The truck is equiped with Hydroboost. There is no… read more
Dennis
Dennis
Senior Master A Technician/Shop Foreman
Vocational, Technical or Trade Scho
758 satisfied customers
1998 Ford Windstar: With Traction Control..fixing..brake pedal goes
I have a 1998 Ford Windstar With Traction Control. I got it from a friend and am fixing it up to give to my son. He said that the brake pedal goes to the floor when stopped. I immediately figured that… read more
CTFordTech
CTFordTech
Auto Technician
Vocational, Technical or Trade Scho
4,894 satisfied customers
94 Ford F250: brake pedal..engine running..3 master cyls, New calipers
94 Ford F250 4x4 7.3 Desiel. Loosing brake pedal only with engine running. new Booster, 3 master cyls, New calipers, New wheel cylinders in the rear. Vacuum pump reading 21 in hg. Vacuum bleed brakes … read more
ZZDaryl
ZZDaryl
Lead Auto Tech
Some college and advanced training
11,485 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

26,187 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

31,725 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,994 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,535 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x