Ford

Have Ford questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Ford Questions
I have a 99 F350 with the V10 engine. I'm having an issue
I have a 99 F350 with the V10 engine. I'm having an issue with the clutch, I had the vehicle at the body shop, when I went to pick it up the clutch pedal was on the floor, I was able to pull it back t… read more
Roy
Roy
shop foreman
Associate Degree
5,360 satisfied customers
Keep losing pressure in the clutch pedal.I have replaced the
keep losing pressure in the clutch pedal.I have replaced the master cylinder and flushed out all the contaminated all the old brake fluid that was in there. I can not find any wet spots andwhere so I … read more
Julio Quispe
Julio Quispe
181 satisfied customers
I have an 08 Ford Focus with a 5-speed manual. My wife was
I have an 08 Ford Focus with a 5-speed manual. My wife was saying the clutch seemed soft. I noticed the shared brake/clutch master cylinder was low so I suspected it may have air in it. I cracked the … read more
Randall C
Randall C
Auto Technician / Consultant
Vocational, Technical or Trade Scho
13,497 satisfied customers
I have a 1994 F150. It has a hydraulic clutch that I had the
I have a 1994 F150. It has a hydraulic clutch that I had the repair shop bleed about a year ago. The same thing is happening again. … read more
Roy
Roy
shop foreman
Associate Degree
5,360 satisfied customers
Ford F150 Eddie Bauer: I have a 1996 Ford 150 Eddie Bauer edition
I have a 1996 Ford 150 Eddie Bauer edition with a 5speed stick. My clutch pedal has suddenly gone to the floor board or almost and will not return on it's own. The reservoir was empty. This happened i… read more
Stacy Farist
Stacy Farist
High
37 satisfied customers
Bronco II: a 2.9 v-6 my clutch went out but my fluid resevoir is
I have a Bronco II 1986 w/ a 2.9 v-6 my clutch went out but my fluid resevoir is still full of fluid. what are the problem posibilities? how do I bleed the clutch with the trans still in place? I can … read more
Steve
Steve
Service Manager/ Technician
5,473 satisfied customers
1997 Ford Ranger: new transmission few days..wont engage..shift gears
I have a 1997 Ford Ranger 2.3, manual. Few months ago the truck lost all the gears except the 4th i got a new transmission few days ago and just installed it today. The clutch wont engage now, it will… read more
Dieseljunky2
Dieseljunky2
Locomotive Mechanic
Ford Certified Technician
3,589 satisfied customers
96 ranger: one morning it just wouldnt disengage..master or the slave
I was on temporary employment with mt job and let my good neighbor use my 96 ranger, he said one morning it just wouldn't disengage, never slipped etc, would that be the master or the slave or what? T… read more
kalamykid
kalamykid
Pactor automotive
Vocational, Technical or Trade Scho
6,035 satisfied customers
Ford F-350: the clutch needs replacement..bleed..slipping..pedal
On a Ford F-350 1997, 7.3L diesel, with a manual trans, without pulling the trans, how thick should the clutch be before changing it. I'm not sure if the clutch needs replacement, i bleed the slave cy… read more
FordMasterTech
FordMasterTech
Vocational, Technical or Trade Scho
119 satisfied customers
1994 ford F-150: ...just put new clutch..bearing..slave..pedal
I have a 1994 ford F-150 pickup..300 six, 5 spd...just put new clutch, pressure plate, throwout bearing, clutch master cylinder and put fluid in it...also new slave cylinder....how do you bleed the cl… read more
lostrider
lostrider
lead technician/working shop foreman
Vocational, Technical or Trade Scho
3,074 satisfied customers
i have a ford expl. sport.1999,sohc 4.0 5 speed stick.i
i have a ford expl. sport.1999,sohc 4.0 5 speed stick.i installed a clutch kit.resurf fly,new slave cyl. bleed slave,master as well,good stream pedal still soft throw out moves but does not fully enga… read more
Dodge expert
Dodge expert
ASE MASTER TECH, REPAIR FACILITY OWNER
High School or GED
3,636 satisfied customers
2004 Ford Ranger 4x4: V6..Clutch pedal..cold weather..master cylinder
2004 Ford Ranger 4x4, 4.0L V6, manual trans Clutch pedal goes to the floor & cannot put it in gear. Is this a common problem in cold weather or does master cylinder or slave cylinder the problem?… read more
Mazda Ed
Mazda Ed
Lead Technician
High School or GED
2,269 satisfied customers
Ranger: Ive heard..clutch was recently replaced so I
Help!!! Cant get clutch to work in a 93' Ranger. Ive heard this can be diffcult. Replaced transmission - clutch was recently replaced so I did not replace it. I broke the line between the clutch maste… read more
Don
Don
Shop Forman, lead tech
Vocational, Technical or Trade Scho
986 satisfied customers
2003 Ford F-150: 4X4..clutch pedal..I drove it..slipping
My son has a 2003 Ford F-150, 4X4, V-6, manual 5-speed. He was driving home Saturday and the clutch pedal hit the floor and had only about 2" of clutch left. I drove it and the clutch is not slipping(… read more
AlvinC
AlvinC
Ford Dealership Technician
Vocational, Technical or Trade Scho
1,238 satisfied customers
89 Ford F250: hydraulic..master..the clutch, pressure plate..bearing
I have an 89 Ford F250, 300 6, standard transmission. I have had nothing but problems with the hydraulic cluch. I have replaced the slave and slave master twice, the clutch, pressure plate and through… read more
j_ramsey
j_ramsey
High School or GED
480 satisfied customers
1999 ford ranger slave cyl bleeding procedure,clutch will ...
1999 ford ranger slave cyl bleeding procedure,clutch will not release till pedal is on the floor. I bled cyl per manual and also pryed back and forth on release bearing per tech line, still pedal is n… read more
stefano
stefano
Auto Technician
Vocational, Technical or Trade Scho
236 satisfied customers
I need to replace the hydraulic line from clutch master ...
I need to replace the hydraulic line from clutch master cylinder to internal slave cylinder on 1985 ford bronco II. This model does NOT have quick disconnect fittings. I need to know how to disconnect… read more
Marc
Marc
fleet supervisor
Vocational, Technical or Trade Scho
1,140 satisfied customers
1994 Ford Escort: slave cylinder..the clutch lost power again
My daughter's boyfriend replaced the clutch on my daughter's 1994 Ford Escort. He also replaced the slave cylinder. The car worked well for a week or two and the clutch lost power again. So he replace… read more
Fordster
Fordster
Mastertech
Vocational, Technical or Trade Scho
2,650 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

26,187 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

31,725 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,994 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,535 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x