Ford

Have Ford questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Ford Questions
I have a 03 ford f250sd with 6.0l diesel on startup after
I have a 03 ford f250sd with 6.0l diesel on startup after sitting overnight it starts and dies immediatly, after the third try it starts and runs fine, i replaced the anti drainback valve, oil filter,… read more
David R.
David R.
Supervisor/Shop Foreman
High School or GED
388 satisfied customers
2004 powerstroke crank no start No codes No FICM sync While
2004 powerstroke crank no start No codes No FICM sync While cranking: 160 RPM FICM L 12.2V FICM M 48.5V FICM V 12.5V FICM SYNC NO ICP V 1.30V ICP PRESS 1007.5 CAM SYNC YES IPR 32%… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
31,725 satisfied customers
2004 Ford f250 6.0L. Just changed injectors and stand pipes.
2004 Ford f250 6.0L. Just changed injectors and stand pipes. Now have crank no start. No ficm sync. I have cam and crank sensor sync. Ficm voltage is around 48.2 while cranking. Rail pressure is 1100p… read more
richard cole
richard cole
OWNER/OPERATOR
Associates (2 YRs)
215 satisfied customers
Crank no start, yes, im way beyond this. had this problem
yes, im way beyond this. had this problem for some time now have replaced the ficm, ecm, and 6 glow plugs. the engine is not getting fuel as the glow plugs were dry when i remove them. i have gone thru the entire wiring harness and inspected it., it was all sound. i use torque pro as my readed and all the pressures the sync are nominal. still it won't fire … read more
HDGENE
HDGENE
7,983 satisfied customers
I replaced the heads, HPOP, Fuel pump, Glow plug module, new
I replaced the heads, HPOP, Fuel pump, Glow plug module, new wiring harnesses (Excluding main engine harness) I am getting the proper pressures ie. Oil and fuel. Proper voltage even with the FICM. Tru… read more
Ray M.
Ray M.
Diesel Technician
Vocational, Technical or Trade School
3,087 satisfied customers
I have no ficm power. Truck shut down a week ago. Found wire
I have no ficm power. Truck shut down a week ago. Found burnt wire going in ficm on the long block plug into ficm. Replaced pigtail and ficm, and still no ficm sync … read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
8,507 satisfied customers
Have a 2003 6.0 no start gives cmp ckp open codes replaced
have a 2003 6.0 no start gives cmp ckp open codes replaced sensors replaced harness with new one from ford subbed a known good pcm and ficm still no sync no start … read more
James
James
Bachelors degree automotive technology with minor in diesel
3,584 satisfied customers
Need help with 2004 F350 6.0 diesel. Intermittent starting.
Need help with 2004 F350 6.0 diesel. Intermittent starting. I'm not doing detailed diagnostics right now, just a few general questions regarding ckp, cmp and pcm… read more
James
James
Bachelors degree automotive technology with minor in diesel
3,584 satisfied customers
Cater I have an 04 6.0 it's throwing ficm codes but it
I'm James cater I have an 04 6.0 it's throwing ficm codes but it checks out fine it holds 48 volts in the unit pcm maybe have checked wiring help!!… read more
HDGENE
HDGENE
7,983 satisfied customers
ford f250: 04 ford f250 6.0 died and wont start. had several
04 ford f250 6.0 died and wont start. had several codes including low icp pressure, crank sensor circuit range/performance, internal control module kam malfunction, injector circuit low cyl. 8.… read more
James
James
Bachelors degree automotive technology with minor in diesel
3,584 satisfied customers
Ford 350: 2006 Ford F-350 will not start. Injectors are not
2006 Ford F-350 will not start. Injectors are not responding. Buzz test shows good with no buzz of injectors. High pressure oil 1700lbs. Fuel pressure good. Ficm put into another truck and injectors c… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
31,725 satisfied customers
no codes and engine cranks but will not start or even try
I have no codes and engine cranks but will not start or even try except for an occasional fire every so often.… read more
Ironmike
Ironmike
ASE Master ,Ford Certified Master Tech
Vocational, Technical or Trade Scho
3,475 satisfied customers
Ford F250 Pickup Super Cab 4x4 i have a 04 pwrestroke that
i have a 04 pwrestroke that starts then stalls and if i keep cranking it over it starts and blows black smoke and runs rough… read more
Fordanswerman
Fordanswerman
Ford Senior Master Technician retired
Associate Degree
3,304 satisfied customers
04 F350 6.0 diesel. Ignition switch blowing 20 amp maxi fuse.
04 F350 6.0 diesel. Ignition switch blowing 20 amp maxi fuse. turning it to start blows fuse. just turning it on powers up accesories but does not work gauges or let it crank. By jumping fuse teminal … read more
John Crouch
John Crouch
lead senior master tech
Vocational, Technical or Trade Scho
1,840 satisfied customers
2003 F-250: 6.0L..P0271 ( cylinder 4 injector circuit..wiring harness
Hi ,iv got some codes coming up and not sure whats causing them. My truck is a 2003 F-250 with the 6.0L - the codes are P0262 ( cylinder 1 injector circuit high ) , P0271 ( cylinder 4 injector circuit… read more
Mazda Ed
Mazda Ed
Lead Technician
High School or GED
2,269 satisfied customers
2003 6.0 diesel..ficm low voltage code keeps coming..cylinder
i have a 2003 6.0 diesel, which i have replaced all the fuel injectors. the ficm low voltage code keeps coming up and every week a different fuel injector cylinder code comes up. we have replaced numb… read more
SuperBob
SuperBob
Ford dealer senior master technician
Vocational, Technical or Trade Scho
2,603 satisfied customers
Black smoke..dealership, prob identified as EGR and carbon buildup
06 250 K. Ranch. Last month decreased power and accasional heavy black smoke. I took it to dealership, prob identified as EGR and carbon buildup. EGR replaced and baffle kit installed. truck now has w… read more
fordman312009
fordman312009
Associate Degree
404 satisfied customers
An 03 with a 6l powerstroke..engine cranks..wont start..sitting
I have an 03 with a 6l powerstroke. The engine cranks but won't start. After sitting a while or a few days it will start and have no problems for days or weeks and then it will do it again. Doesn't ma… read more
RJ
RJ
Ford Tech
High School or GED
1,573 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

26,187 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

31,725 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,994 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,535 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x