Ford

Have Ford questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Ford Questions
I just was informed when my cylinder on my 1994 Ford ranger
Second opinion] I just was informed when my slave cylinder on my 1994 Ford ranger was replaced the guy forgot to put the new o ring on it do I have take trans back out? Which side is it on… read more
J Hall
J Hall
retired
none
196 satisfied customers
I HAVE A 1990 FORD RANGER XLT AND THE CLUTCH HYDRAULIC LINE
I HAVE A 1990 FORD RANGER XLT AND THE CLUTCH HYDRAULIC LINE CAME OUT OF THE BELL HOUSING AND I ATTEMPTED TO RECONNECT IT AND I WAS UNSUCCESSFUL. CAN THE LINE BE RECONNECTED WITHOUT DROPPING THE TRANSM… read more
Tony McCarthy
Tony McCarthy
Owner Technician
696 satisfied customers
I have a 2002 ford ranger with a manual trans. if i let it
i have a 2002 ford ranger with a manual trans. if i let it sit and idle for a few minutes then attempt to put it gear it wont go. … read more
Eric
Eric
Retired
N/A
37,390 satisfied customers
I have a 1993 ford ranger and I keep blowing out the
hi I have a 1993 ford ranger and I keep blowing out the slave cylinder can I get some help on why this keeps happening I have changed about three of these in less then a year … read more
kalamykid
kalamykid
Pactor automotive
Vocational, Technical or Trade Scho
6,017 satisfied customers
The side of the male connector of my clutch line (which runs
The slave side of the male connector of my clutch line (which runs from the master to the slave) is a smaller diameter than the new clutch slave cylinder female connector, on a 1996 ranger 2wd 4.0. Ca… read more
Roy
Roy
shop foreman
Associate Degree
5,216 satisfied customers
Ford Ranger: vibration..neutral..goes away..I push the clutch in
Hi, My 1994 Manual stick Ford Ranger has a very noticeable vibration noise when in neutral. It only happens when I run it for fifteen minutes or more and it goes away if I push the stick an inch or tw… read more
Thomas
Thomas
Mechanic
High School or GED
1,537 satisfied customers
1994 ford ranger: 4x4, i..four wheel drive..engage..every fuse
I have a 1994 ford ranger manual 4x4, i just pruchased it from my uncle, and i tried the four wheel drive and it worked once. now it will not engage the four wheel high or low, no matter how long i ho… read more
someguy_78
someguy_78
Service Tech
Associate Degree
292 satisfied customers
f250: remove and replace slave cyclinder..diesel..cheers
How to remove and replace slave cyclinder on an f250 2001 4.2 lt diesel. And bleeding process? Cheers Mavis… read more
EMRSR
EMRSR
High School or GED
3,002 satisfied customers
2004 Ford Ranger 4x4: V6..Clutch pedal..cold weather..master cylinder
2004 Ford Ranger 4x4, 4.0L V6, manual trans Clutch pedal goes to the floor & cannot put it in gear. Is this a common problem in cold weather or does master cylinder or slave cylinder the problem?… read more
Mazda Ed
Mazda Ed
Lead Technician
High School or GED
2,269 satisfied customers
Find a replacement O Ring for a 1987 ford ranger slave cylinder
I need to know where I can find a replacement O Ring for a 1987 ford ranger slave cylinder… read more
ase_master327
ase_master327
Owner & Student
High School or GED
3,214 satisfied customers
slave cylinder quick release couplings..transmissions
is there a difference in the slave cylinder quick release couplings on different years of transmissions?… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
26,187 satisfied customers
1994 ford mustang gt: sounded..the clutch is not engaging all the way
I have a 1994 ford mustang gt with a standard transmission, i sarted getting what sounded like something was loose down by my transmission and then when i pressed my clutch it felt like something brok… read more
Don
Don
Shop Forman, lead tech
Vocational, Technical or Trade Scho
986 satisfied customers
Ford ranger: 4cyl..Manual Trans..the clutch master cyl..hose
Hi I have an'86 ford ranger 4cyl. Manual Trans. I have replaced the clutch master cyl but cannot get the hose back into the trans, it looks simple but just will not go in all the way. the way the rubb… read more
Gary
Gary
Line Technician
High School or GED
152 satisfied customers
2000 Ford ranger: change out the master/slave cylinder..clutch
How difficult is it to change out the master/slave cylinder on a 2000 Ford ranger? The clutch's symtom is, it's hard to get into 1st, especally when hot.… read more
John Mc
John Mc
Ford Technician
Vocational Trade School
5,495 satisfied customers
1994 ford ranger: 4 cyl., standard trans..clutch..release
I have a 1994 ford ranger, 4 cyl., standard trans.. The clutch seems not to release all the way, at times. It usally releases quite well when the truck is cold. There are no noises, . at first I thaug… read more
Wrenchtech
Wrenchtech
Vocational, Technical or Trade Scho
616 satisfied customers
1994 Ford Ranger: Clutch stays engages..slave cylinder..bleeder
I own a 1994 Ford Ranger Pickup, 3.0 engine. Clutch stays engages with starting engine. Where is the slave cylinder located and where is the bleeder to the slave?… read more
geddyrocks2112
geddyrocks2112
Automotive Technician
High School or GED
4 satisfied customers
1994 Ford Ranger: replacing..clutch..4wd 4.0 liter..completly
I need info on replacing the clutch slave cylinder on a 1994 Ford Ranger 4WD 4.0 liter. It is leaking fluid out of the bell housing. Do I have to pull the bell housing, etc. completly loose to get to … read more
Fordanswerman
Fordanswerman
Ford Senior Master Technician retired
Associate Degree
3,304 satisfied customers
1992 ford ranger: master..the cap back on then pump the clutch
i have a 1992 ford ranger its not wanting to go into gear you can take the cap off the master clynder and add more fluid then put the cap back on then pump the clutch and the truck will then go into g… read more
Fordanswerman
Fordanswerman
Ford Senior Master Technician retired
Associate Degree
3,304 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

26,187 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

31,725 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,994 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,535 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x