Ford

Have Ford questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Ford Questions
Codes p0340, p0344 and p0304. Replaced cam position sensors.
Codes p0340, p0344 and p0304. Replaced cam position sensors. No change … read more
Kenny Z.
Kenny Z.
Ford Senior Master Technician
High School or GED
6,583 satisfied customers
I have a 2012 6.7 powerstroke that is giving me a camshaft
I have a 2012 6.7 powerstroke that is giving me a camshaft sensor fault code p0340 i replaced the sensor and it runs rough and i am still getting the same code what could be the issue? … read more
richard cole
richard cole
OWNER/OPERATOR
Associates (2 YRs)
195 satisfied customers
2012 ford f150 3.5 ecoboost codes p0340 and p0344. We did
I replaced camshaft sensor bank 1 right side upper one … read more
J Hall
J Hall
retired
none
196 satisfied customers
Engine light code (3440) - camshaft position sensor fault,
Engine light code (3440) - camshaft position sensor fault, replaced sensor but still getting light … read more
Tim Mohr
Tim Mohr
SHOP OWNER
Master's Degree
17,380 satisfied customers
Ford Ranger 2000, engine light on, runs but not normal
Ford Ranger 2000, engine light on, runs but not normal power, idles rough, Code P0340. Have taken to two mechanics, yet to have a solution. Last one thinks a valve may be bent. I have always maintaine… read more
HDGENE
HDGENE
7,733 satisfied customers
Doesn't start and come out the code p0340. I checked it. the
yes I checked it. the thing was i was driving and the engine turned off itself … read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
41,606 satisfied customers
I can't find the cam sensor on my 95 Ford ranger v6 4.0, The
I can't find the cam sensor on my 95 Ford ranger v6 4.0 … read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
41,606 satisfied customers
I have a 2007 ford freestar with a 4.2l engine. the engine
I have a 2007 ford freestar with a 4.2l engine. the engine light is on and I have a code P0340. what do I need to do to repair this issue?… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
41,606 satisfied customers
I have 2006 ford 500 starts ok an idles but died once put in
I have 2006 ford 500 starts ok an idles but died once put in gear... p2106 p0340 and p1336.. could this be camshaft position sensor?… read more
Dan
Dan
Dealership Technician
Associate Degree
2,507 satisfied customers
ford Explorer 4x4: 1998 ford explorer failed smog test with
1998 ford explorer failed smog test with code P0340 camshaft position A sensor circuit... bank 1 or single sensor. what does it mean (?) in reference to what and where it is. how can it be repaired?… read more
Eric
Eric
Retired
N/A
37,390 satisfied customers
1997 Ford Aspire: p0340 (Camshaft Position Sensor Circuit Malfunction
On my 1997 Ford Aspire I have 3 codes that have come up. P0340 (Camshaft Position Sensor Circuit Malfunction) P0300 (Random/ Multiple Cylinder Misfire Detected) P0303 (Cylinder 3 Misfire Detected) How… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
41,606 satisfied customers
1999 ford f150: a 4.2 v6 it is giving a p0340 code..crank sensor
I got a 1999 ford f150 with a 4.2 v6 it is giving a p0340 code. I replaced the crank sensor and did not change. what else could be wrong.… read more
Dieseljunky2
Dieseljunky2
Locomotive Mechanic
Ford Certified Technician
3,589 satisfied customers
i got a camshaft position sensor a bank 1 circuit malfunction
i got a camshaft position sensor a bank 1 circuit malfunction on my 2002 mustang gt...could you tell me exactly what that means and what i need to do to fix it? also if you know the part cost that wou… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
41,606 satisfied customers
88 Ford Windstar: check engine light..Camshaft Position Sensor
My 88 Ford Windstar L3.0 got check engine light on with P0340 Camshaft Position Sensor Circuit Malfunction. What can be the possible cause and any advise on how much it costs to fix it?… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
41,606 satisfied customers
What do i do to fix my ford explorer.. i am seeing code p0340..
what do i do to fix my ford explorer.. i am seeing code p0340.. meaning camshaft positon sensor malfuvtion… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
41,606 satisfied customers
1997 Ford Escort: shows a Service Engine Soon Light..scanner
My 1997 Ford Escort shows a "Service Engine Soon Light" and shows an OBD code of P0340. My OBD scanner says this is a camshaft position sensor A- Bank 1 Circuit malfunction. Can I replace this myself?… read more
Randall    (Cheeko)
Randall (Cheeko)
Ford Dealer
Vocational, Technical or Trade Scho
2,395 satisfied customers
I had a check engine light come on for my ford taurus.
I had a check engine light come on for my ford taurus. I used a OBD2 All-in-one scanner to check the code and it gave me two DTC codes. 1) P0340 "Camshaft Position Sensor Circuit Malfunction" and 2) P… read more
Expert
Expert
I had a check engine light come on for my ford taurus.
I had a check engine light come on for my ford taurus. I used a OBD2 All-in-one scanner to check the code and it gave me two DTC codes. 1) P0340 "Camshaft Position Sensor Circuit Malfunction" and 2) P… read more
Expert
Expert
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

41,606 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

31,725 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,994 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,535 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x