Ford

Have Ford questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Ford Questions
Have question for ford tech. 2015 missfire on cylinders 1
have question for ford tech. 2015 missfire on cylinders 1 and 2. replaced plugs and injectors, #1 and 2 coils and plug wires. compression at 150 on each. good spark, good injector pulse.if i unplug co… read more
HDGENE
HDGENE
7,582 satisfied customers
Misfire on cylinder 8. changed spark plugs and coil packs.
misfire on cylinder 8. changed spark plugs and coil packs. took to ford dealership they did a relearn test on cylinder 8 and cleared the code said it was good. took it home and the engine light came b… read more
HDGENE
HDGENE
7,582 satisfied customers
2005 f350 5.4 3v. Reman engine, 3 yrs & 60k on it. Getting
Getting codes 0172, 0174. 0300, 0303 & 0305 consistently. … read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
19,502 satisfied customers
Any ford techs right now? 2001 f150, Yes and I have no codes
Yes and I have no codes yet runs super rough, power balance test appears to only fire on 3 cylinders … read more
A. Penland
A. Penland
Ford Senior Master Technician
Vocational, Technical or Trade School
7,638 satisfied customers
I ahve a 2014 F150 in the shop, engine just got pulled. tap
Hi, I ahve a 2014 F150 in the shop, engine just got pulled. tap noise. technician found exhaust cylinder #8 damaged. He found the roller on the #8 cylinder completely collapsed causing the noise you h… read more
AZTechBrian
AZTechBrian
ASE Certified Technician & Shop Owner
Vocational, Technical or Trade School
732 satisfied customers
Dealer service center says code p0012 low compression. they
dealer service center says code p0012 low compression. they already replaced solenoid and both sensors. now say they can't fix and I either need new engine or new vehicle. bs or no? … read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
19,502 satisfied customers
I have a misfire under load on cylinder #5 on a 2007 Ford Expedition.
I have a misfire under load on cylinder #5 on a 2007 Ford Expedition. I have recently replaced the plugs and COPs, and I just reinspected the COP boot and the plug with no obvious issues. I checked th… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
26,187 satisfied customers
ok the man put the heads off of my 06 f150 onto the block
ok the man put the heads off of my 06 f150 onto the block from the 03 expedition. he said when it turned over it turned slow but heard a metal against metal as it turned over but stopped. it turns ove… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
31,725 satisfied customers
f350: 2003 f350; 6.0 runs perfect when cold. After it warms
2003 f350; 6.0 runs perfect when cold. After it warms up, it has a rough idle. Has reman turbo, ficm, New oil cooler, egr delete, # XXXXX and 8 injector and new injector harness, new IPR and ICP, map … read more
Ray M.
Ray M.
Diesel Technician
Vocational, Technical or Trade School
3,086 satisfied customers
Ford F150: I have a 2007 Ford F150. The truck was shaking uncontrollably.
I have a 2007 Ford F150. The truck was shaking uncontrollably. I had the computer sent out to manufacturer and rebuilt because it had no signal on cylinders 3 and 4. Received my re-built computer toda… read more
Tim Mohr
Tim Mohr
SHOP OWNER
Master's Degree
17,335 satisfied customers
2003 Ford: 4.6 V8 with 118,000..Took it back to dealer for rough idle.
I purchased a used 2003 Ford F15o 4.6 V8 with 118,000. Took it back to dealer for rough idle. They say there is low compressin on 7 & 8. And a little low on 5 &6. Said one bank is running lean and one… read more
rpmdiag
rpmdiag
High school
8,829 satisfied customers
2004 f150: dealer says..sticking..cylinders..this to a ford dealer
2004 f150 5.4 had plugs changed 130k by a ford dealer before plug change the truck used less than 1 qt of between oil changes now 1 qt every 400 miles the dealer says not there fault, 5 out of the 8 b… read more
Kenny Z.
Kenny Z.
Ford Senior Master Technician
High School or GED
6,415 satisfied customers
2007 f150: cold engine..inclines..once the engine warms it wont skip
usually with a cold engine my 2007 f150 will skip going up minor inclines. once the engine warms it wont skip but feels like it wants to.… read more
Richard
Richard
ASE Certified Technician
Vocational, Technical or Trade Scho
1,535 satisfied customers
F150: runs rough..runs great..two cylinders arent firing when idling
i have an 07 f150 5.4 efi v8 engine with 64,700 miles that runs rough when stopped at lights, and worst when in reverse but runs great when moving, this just started last week. My mechanic says two cy… read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
19,502 satisfied customers
2002 Ford F150: runs rough..idling..with engine misfire cylinder #?
Hi, I have a 2002 Ford F150 V-8 that runs rough when idling. Going down the road around 1500 RPM it misses. The shop I go too ran codes and came up with engine misfire cylinder #?. He put in spark plu… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
31,725 satisfied customers
1999 ford f150: my service engine soon light..o2 sensor..cylinder
i have a 1999 ford f150 with a 4.6 romeo engine. i was coming home from a short 100 mile round trip and my service engine soon light started flashing and as soon as i got back i had the code read whic… read more
Dennis
Dennis
Senior Master A Technician/Shop Foreman
Vocational, Technical or Trade Scho
758 satisfied customers
97 Ford Expedition: running rough..mechanics..p0306..its a misfire
My 97 Ford Expedition Is running rough, took it to the mechanics, he said low compression and code p0306 shows up. So I know its a misfire on #6, but how can I fix this?… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
26,187 satisfied customers
2004 ford f150: 2wd..auto zone..a misfire in #8 cycl..cyl
I have a 2004 ford f150 2wd 5.4lt. I took it to auto zone and had a ob2 test done and the code came back 0316 and 0308 which is a crank shaft sensor, and a misfire in #8 cycl. switched #5 cyl. fuel in… read more
drobbi
drobbi
Vocational, Technical or Trade Scho
76 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

26,187 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

31,725 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,994 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,535 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x