Ford

Have Ford questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Ford Questions
2001 F250 7.3 Will a bad injector solenoid cause the IDM to
2001 F250 7.3 Will a bad injector solenoid cause the IDM to shut down 1 bank of cylinders? I have a P0276 and a P1276. Buzz test is weak on #6... Engine runs for 2-3 seconds the left bank shuts down. … read more
Chad Farhat
Chad Farhat
Owner
Associate Degree
7,493 satisfied customers
2001 ford f250 7.3. Fixing myself so far I have replaced
yes fixing myself so far I have replaced injector #7 twice and replaced 1,3 ok where do I start … read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
31,725 satisfied customers
Ive got a 1997 f250 with the 7.3 and I am not getting power
Ive got a 1997 f250 with the 7.3 and I am not getting power to the 4 injectors on the passenger side. I have replaced the idm pcm and all 8 injectors. I get signal to the injectors on that side but ca… read more
Roy
Roy
shop foreman
Associate Degree
5,256 satisfied customers
2001 7.3 wont start. It cranks replaced every sensor in the
2001 7.3 wont start. It cranks replaced every sensor in the truck including ipr valve control module. While it cranks there is an exhaust odor but will not start … read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
31,725 satisfied customers
1997 7.3 wont fire on right bank Have checked all wiring,
Second opinion] 1997 7.3 wont fire on right bank Have checked all wiring, ohmed injectors, installed refurbished IDM, new cam sensor, new high pressure oil sensor and new glow plugs. … read more
Chris Carr
Chris Carr
Ase Master
Ase Master Tech
463 satisfied customers
Have a ford f-550 super duty diesel 7.3, the trouble is that
have a ford f-550 super duty diesel 7.3, the trouble is that it cranks but will not start. it has a new engine wiring harness, fuel injectors glow plugs under cover harness', glow plugs , pcm, idm. It… read more
Andrew
Andrew
Master Ford Technician
Associate of Occupational in Automotive Technology
700 satisfied customers
IDM wiring failure, codes p0263, p0269, p0275, p0281. Newer
IDM wiring failure, codes p0263, p0269, p0275, p0281. Newer style of VCG that doesn't have the underside plugs just the molded wiring. Tested ohms on passenger side VCG and all were about 3.4 or so. T… read more
Andrew
Andrew
Master Ford Technician
Associate of Occupational in Automotive Technology
700 satisfied customers
what to test first and what commonly causes these codes?
what to test first and what commonly causes these codes? crank & no start, codes present: P0603, internal control module cam error---P1316, injector driver module code detected-IDM---P1247, turbo … read more
Wayne Crawford
Wayne Crawford
4,037 satisfied customers
Ford F 350: I have a 1997 ford F 35o 7.3 diesel. It was running
I have a 1997 ford F 35o 7.3 diesel. It was running fine, stopped now will not crank. I have put in a new starter, new batteries, new fuel filter, new fuel pump, new gasket with wiring for glow plugs … read more
James
James
Bachelors degree automotive technology with minor in diesel
3,584 satisfied customers
F250: I have a 2001 f250 with a 7.3l powerstroke. It will
I have a 2001 f250 with a 7.3l powerstroke. It will not start. I get a p1670 and a p0603 code. I have replaced the IDM twice, and the PCM, I ohmed out the wires between the IDM connector and the PCM c… read more
James
James
Bachelors degree automotive technology with minor in diesel
3,584 satisfied customers
ford f250: I have a 2000 ford f250 7.3 diesel that is not firing
I have a 2000 ford f250 7.3 diesel that is not firing on injector 6 changed injector still not firing checked valve cover wiring ok… read more
Ray M.
Ray M.
Diesel Technician
Vocational, Technical or Trade School
3,086 satisfied customers
1995 Ford F250: 7.3 diesel..stop light..stopped running..restart.
I have a 1995 Ford F250 7.3 diesel and when I pulled up to a stop light yesterday it just stopped running asd if I hard turned the motor off. It would not restart. No check enginge lights. The Voltage… read more
Mat
Mat
Ford Senior Master Technician
Associate Degree
956 satisfied customers
cylinders..No voltage going to injectors on that side..low voltage
Vehicle is not firing on cylinders 1,3,5,7, but is firing on other side. No voltage going to injectors on that side of the engine, but I do get pulse at a low voltage. What could cause this??? Where s… read more
John Crouch
John Crouch
lead senior master tech
Vocational, Technical or Trade Scho
1,840 satisfied customers
cylinders..No voltage going to injectors on that side..low voltage
Vehicle is not firing on cylinders 1,3,5,7, but is firing on other side. No voltage going to injectors on that side of the engine, but I do get pulse at a low voltage. What could cause this??? Where s… read more
Pavlin Koev
Pavlin Koev
Diagnostic Technician
High School or GED
3,485 satisfied customers
f350: injection..pcm..Injectors O/H to stock (aa) specs.
97' F350 7.3L - no injection. PCM and IDM bench tested and certified, test run on engine stand. Injectors O/H to stock (AA) specs. Cam sensor installed under recall/warranty. New ICP and IPR. New ign … read more
Pavlin Koev
Pavlin Koev
Diagnostic Technician
High School or GED
3,485 satisfied customers
2002 f250: wiring harness..injectors..625 psi while cranking..pcm
im working on a 2002 f250 7.3. the wiring harness to the injectors and glow plugs were burnt i replaced the harness and valve cover gaskets and harness under the valve covers as well as glow plugs. th… read more
Tim Mohr
Tim Mohr
SHOP OWNER
Master's Degree
17,495 satisfied customers
1999 F350: START. COMPRESSION..EITHER WHILE CRANKING ENGINE TO SEE
1999 F350 7.3 DL WILL NOT START. COMPRESSION MEASURED 310 TO 400 ON ONE BANK. TRIED A SLIGHT AMOUNT OF EITHER WHILE CRANKING ENGINE TO SEE IF IT WOULD FIRE WITH NO RESULT. WE CHECK WITH FORD SERVICE A… read more
Ray M.
Ray M.
Diesel Technician
Vocational, Technical or Trade School
3,086 satisfied customers
e350: wont start..glow plugs..problem somewhere in my wiring harness
I have an 03 e350 7.3 that wont start. Sometimes I get power to the right bank (glow plugs etc.) and sometimes not. I''m sure there is a problem somewhere in my wiring harness. But even when I get pow… read more
fordguy1217
fordguy1217
Associate Degree
8 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

26,187 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

31,725 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,994 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,535 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x