Ford

Have Ford questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Ford Questions
Put new timing and phasers in 2004 f150. now I'm setting
Put new timing and phasers in 2004 f150. now I'm setting timing and chains don't line up on phaser. used the timing tool and still off. the passenger side cam is set right but crankshaft is at 3 0cloc… read more
David Craig
David Craig
OWNER/MECHANIC
Associates
6,696 satisfied customers
Typical 5.4 Triton rough running when engine winds down to
Typical 5.4 Triton rough running when engine winds down to an idle when up to temperature. I've replaced VCT solenoid, and cam position sensors … read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
10,913 satisfied customers
Ty. 2004 Ford F150 Lariat 5.4 Trition. I replaced both of
I replaced both of the cam sensors , and both of the VCT senoliads ,and now all of the coils … read more
HDGENE
HDGENE
6,651 satisfied customers
I have a 2004 F150 5.4L 3V engine. Just did the timing
Hi, I have a 2004 F150 5.4L 3V engine. Just did the timing chains, guides, tensioners and a new oil pump. I didn't replace the cam phasers, since they were fine. Q: both of the cam phasers have L on t… read more
A. Penland
A. Penland
Ford Senior Master Technician
Vocational, Technical or Trade School
7,141 satisfied customers
Im replacing cam phasers and when i got the valve covers off
Im replacing cam phasers and when i got the valve covers off the cam phasers are on the wrong side? R is on the driver side & L is on the passenger? I'm installing lock outs, should i keep them in the… read more
A. Penland
A. Penland
Ford Senior Master Technician
Vocational, Technical or Trade School
7,141 satisfied customers
Ford F150 5.4 3V: I have ford F150 5.4 3v Iam relplace both
I have ford F150 5.4 3v Iam relplace both cam phaser. Everytime that I rotat the egine to the 12 o' clock position the L on the driver side is up,but right side is showing an L also. How do i fix this… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
29,223 satisfied customers
08 5.4 f150 drivers side chain has a lot of slack at the bottom.
08 5.4 f150 drivers side chain has a lot of slack at the bottom. replaced phaser, guides, chain, crank sprocket but can't get bottom of chain tight. all marks are lined up.… read more
Kenny Z.
Kenny Z.
Ford Senior Master Tech
High School or GED
6,234 satisfied customers
F150: I need the timing chain marks and diagram for a 2008
I need the timing chain marks and diagram for a 2008 ford F150 5.4 engine this one has the cam phasers on end of cam gear… read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
8,063 satisfied customers
F-150: Brad 2008 F150 variable camshaft timing sensor - would
Brad 2008 F150 variable camshaft timing sensor - would this cause a loud rattling? Was there a TSB for this issue?… read more
Eric
Eric
Retired
N/A
33,772 satisfied customers
F150: I am installing new timing chains, phasers and crank
I am installing new timing chains, phasers and crank sprocket, but somehow the marking don't seem to line up. Both chains have 1 mark on one side and 2 marks on the other end, I assume it doen't make … read more
A. Penland
A. Penland
Ford Senior Master Technician
Vocational, Technical or Trade School
7,141 satisfied customers
2008 F150: flex..Serpentine belt broke, took..wiring harness
2008 F150 5.4 FLEX FUEL. Serpentine belt broke, took out cam sensor and ripped engine wiring harness. Replaced left side cam sensor and complete engine harness. Started truck and it ran for a couple o… read more
MasterTech509
MasterTech509
268 satisfied customers
I have a 2002 ford f150 with the 5.4,i am replacing the timing
I have a 2002 ford f150 with the 5.4,i am replacing the timing chains,i have everything apart and i have the special tools.My question is i have both new timing chains in place and the new tensionsers… read more
someguy_78
someguy_78
Service Tech
Associate Degree
292 satisfied customers
2004 Ford F150: crank, which cylinder has to be tdc..worn cam
I'm working on 2004 Ford F150 with the 5.4, to make sure that I'm not 180 out on the crank, which cylinder has to be TDC? I have a worn cam and rockers and I'm going to replace both cams,all the rocke… read more
kalamykid
kalamykid
Pactor automotive
Vocational, Technical or Trade Scho
5,452 satisfied customers
2005 F150: 000 miles..My mechanic says the cam chain tensioner
I have a 2005 F150 with 47,000 miles and a 5.4 motor. My mechanic says the cam chain tensioner for the left side has let loose and that Ford has a bulletin out on it. The after market repair kit is $4… read more
Kenny Z.
Kenny Z.
Ford Senior Master Tech
High School or GED
6,234 satisfied customers
2004 ford F150: the truck not wanting to idle and dies when pulling
I have a 2004 ford F150 with a 5.4. Having trouble with the truck not wanting to idle and dies when pulling up to a stop light. code p0022. You can uplug the solenoid for the drivers side cam phaser a… read more
Tim Mohr
Tim Mohr
SHOP OWNER
Master's Degree
16,211 satisfied customers
2001 f150: bank #1, sensor #2 o2 sensor..2wd..code po
where is the bank #1, sensor #2 O2 sensor on my 2001 f150 2wd 7700 series. code PO1'36 says replace, but which is which?… read more
Don - Mo Lurch
Don - Mo Lurch
Owner
Vocational, Technical or Trade Scho
10,685 satisfied customers
2004 ford f150: oil flush and passenger side cam and cam bearing..rpm
2004 ford f150 5.4. Just had oil flush and passenger side cam and cam bearing replaced. All good but now when put in drive idle is too low 2 to 300 rpm. somtimes dies. Put in P or N and goes back to n… read more
Ray M.
Ray M.
Diesel Technician
Vocational, Technical or Trade School
3,071 satisfied customers
2004 F150: L..the P0053 code (heated oxygen sensor..resistance
I have a 2004 F150 with 5.4 L engine. It shows the P0053 code (heated oxygen sensor Bank 1 Sen 1 Heater resistance). How do I fix it? Thanks.… read more
Anthony
Anthony
Master Automobile Technician
Vocational, Technical or Trade Scho
11,778 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

25,182 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

29,223 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,591 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,524 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x