Ford

Have Ford questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Ford Questions
Miss fire at start up ford f350 5.4. 2002 cylinder #4. Tried
yes tried switching fuel injectors # 4 for # 1 same problem … read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
10,909 satisfied customers
ford f1150: I have a mis fire on Cyl.5 . I just changed all
I have a mis fire on Cyl.5 . I just changed all plugs and coils. and still have the mis fire. Happens more noticable under load. 2007 f150… read more
Roy
Roy
shop foreman
Associate Degree
4,528 satisfied customers
F350 super Crew: 2002 F350 v10 supercrew #4 coil pack keeps
2002 F350 v10 supercrew #4 coil pack keeps going out truck sputters real bad. Occasionally dies at idle. Sometimes strong odor of gas. Replaced all ten plugs and coil packs.… read more
Expert
Expert
frod windstar: i changed the plugs and wires on my 2003 windstar.
i changed the plugs and wires on my 2003 windstar. In park it idles fine, put it in gear and it's rough. It hesitates when you give it gas to pull out. The code says miss fire on cylinders 1 & 3. It s… read more
Edward
Edward
Professional at Justanswer.com
Associate Degree
3,646 satisfied customers
Ford F350 super duty v10: 2003 f350 v10 sluggish at 40mph under
2003 f350 v10 sluggish at 40mph under load truck stutters almost like hitting bumps in the road,engine starts and idles fine, no hesitation when gunning in park.hope its not a tranny issue.… read more
Steve
Steve
Ford tech Specializing in electronics
Vocational, Technical or Trade School
6,745 satisfied customers
2006 ford f350 pickup: crank shaft and the cam shaft..heads..000 miles
I have a 2006 ford f350 pickup with a 6.8 30 valve triton v10. I was going to try to overhaul but low oil pressure killed the crank shaft and the cam shaft and both heads. My fire department was given… read more
Mat
Mat
Ford Senior Master Technician
Associate Degree
950 satisfied customers
2000 ford f350: dtc..new plugs and coils all cylinders..injectors
I have a 2000 ford f350 with the v10 the engine has a slight miss at idle and very noticable at 55 in overdrive it actually shakes the truck. No dtc codes and brand new plugs and coils all cylinders, … read more
SuperBob
SuperBob
Ford dealer senior master technician
Vocational, Technical or Trade Scho
2,603 satisfied customers
Ranger: v6..# 1 cyl misfire (was not firing..No bubbles in radiator
03 Ranger V6 3.0L error codes P 0301 and P 0316. # XXXXX cyl misfire (was not firing and replaced plug) Cleaned mass air flow sensor(same problem 6 mos ago and cleaning worked). No bubbles in radiator… read more
Bamaman39
Bamaman39
Ford master diesel Tech.Ford certified
High School or GED
2,286 satisfied customers
2005 Ford Expedition: 5.4L..mis-firing..1 week later same problem
I have a 2005 Ford Expedition (V8, 5.4L) . 3 weeks ago it started mis-firing. Mechanic replaced #1 coil/sparkplug. 1 week later same problem, mechanic said that now the #1, #2, #3 coils were bad, repl… read more
CTFordTech
CTFordTech
Auto Technician
Vocational, Technical or Trade Scho
4,894 satisfied customers
2001 F350 - 6.8L-2v V10 engine 4R100 Trans - Surge or miss-firing
2001 F350 - 6.8L-2v V10 engine 4R100 Trans - "Surge" or miss-firing under load issue. At idle engine seems fine, no hesitation, starts to surge or miss-fire as soon as I shift in to gear (reverse or d… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
29,223 satisfied customers
2001 f-150: that keeps burning the coils, but it only shows a mis-fire
i have a 2001 f-150 that keeps burning the coils, but it only shows a mis-fire which i have changed the coils several times and they keep buring. Any suggestions on what could be causing the mis-fires… read more
kevin
kevin
Ford Tech
Vocational, Technical or Trade Scho
350 satisfied customers
2003 escape: .have..#1 and 2 cly mis fire where should I go from
I have a 2003 escape.have read a code p302 #1 and 2 cly mis fire where should I go from here… read more
kevin
kevin
Ford Tech
Vocational, Technical or Trade Scho
350 satisfied customers
2006 ford mustang: miss fire..7 change coil ran good for a few mins
2006 ford mustang miss fire on 7 change coil ran good for a few mins then started mis on 7 again… read more
mr.james
mr.james
Associate Degree
50 satisfied customers
2000 E-150: conversion van..4.6L (cop engine)w/ 60,000 miles...cyl
I own a Ford 2000 E-150 conversion van. 4.6L (cop engine)w/ 60,000 miles. A year and1/2 ago the #8 cyl. started mis-fireing .I replaced the plug and the coil over the plug and everything was fine. Now… read more
Richard
Richard
ASE Certified Technician
Vocational, Technical or Trade Scho
1,524 satisfied customers
2003 F350: brake light and hazard have gone out..mechanic says..relay
2003 F350 Truck, the brake light and hazard have gone out. The mechanic says it is the same relay for both, and that has gone out. 1. is that correct, 2. what is the item called exactly and 3. where i… read more
Tech Xpert
Tech Xpert
National Technical Consultant
Associate Degree
161 satisfied customers
F150: it to auto zone and their diagnostic said I..mis-fire..injector
My f150 is shuttering extremely bad. I took it to auto zone and their diagnostic said I had a number 3 mis-fire. I tried some stuff called sea foam they said may clean the injector and I replaced the … read more
Vincent
Vincent
Automotive Technician
High School or GED
808 satisfied customers
A 99sd250 v10 120,000 miles with a mis fire on the #2 cyl..injector
i got a 99sd250 v10 120,000 miles with a mis fire on the #2 cyl. replaced coil,plug and injector whats next?… read more
HDGENE
HDGENE
6,647 satisfied customers
Ford F-250: 4.6L..mis-fire..tune-up..3 on the same coil pack
my Ford F-250's 4.6L ford started to mis-fire on cylinders 1 &3 after i did a tune-up. both cylinders 1 and 3 on the same coil pack. we checked the coil, plugs, and wires. everything checks fine. the … read more
Glenn
Glenn
Senior Master Ford Technician
Associate Degree
1,746 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

25,182 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

29,223 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,591 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,524 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x