Ford

Have Ford questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Ford Questions
I have a 1965 Mustang with the HIPO 289. I recently replaced
I have a 1965 Mustang with the HIPO 289. I recently replaced the head gasket and I'm having issues with the timing. Also, I went with a solid state distributor and a mild cam. The issue I'm having is … read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
8,110 satisfied customers
I have a fe 390 that runs absolutely perfect until vacuum
I have a fe 390 that runs absolutely perfect until vacuum advance is hooked up. When hooked up it backfires on acceleration. Is also electronic ignition, pickup is 1977 f250 don't know what year engin… read more
Roy
Roy
shop foreman
Associate Degree
4,585 satisfied customers
Ford 302: I am trying to start an engine for the first time
I am trying to start an engine for the first time since it was rebuilt. It cranks but won't fire - getting a little bit of fuel spitting back up through the carb and some backfire.… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
25,182 satisfied customers
mustang: just replaced a 289 for a 302 ,i know idle should
just replaced a 289 for a 302 ,i know idle should be(NNN) NNN-NNNNrpm for the 289 . have a comp cam with 512 lift ,a stroker 331 ,gt40 heads . im guessing should be about the same .msd dist,and a msd … read more
Auto Psychic
Auto Psychic
owner
Bachelor's Degree
76 satisfied customers
1975 f100: wont start. turn key to ignition powers up coil.
Ok so I bought a 1975 f100 somebody put a 80ish 302 high output mustang motor in the truck. wont start. turn key to ignition powers up coil. turn over to start no spark from coil, let up on key half w… read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
8,110 satisfied customers
1976 f-250: 4x4..previous owner..less than 15,000 miles on a rebuild
I bought a 1976 f-250 4x4 with a 429 engine. Obviously not the stock motor. the previous owner told me that the engine had less than 15,000 miles on a rebuild. The fact that it has between 18 to 20 in… read more
ps1067
ps1067
Lead Technician
Master's Degree
68 satisfied customers
1983 ford: cam..rev..cap ,and rotar and have adjusted the distributor
i have a 1983 ford pu, with a 302 motor i had a local mechanic tell me that my truck had spun a lobe on the cam, the truck will fire right up and idel you can rev the truck up and all sounds good but … read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
25,182 satisfied customers
1965 Ford Mustang: front fender..single barrel carb mounted on it
I have a 1965 Ford Mustang. Pretty sure the engine in it is not the origiinal as the eblem on the front fender states 287. But this is a straight 6 with a single barrel carb mounted on it. The carb ha… read more
Don
Don
fleet superintendent
Vocational, Technical or Trade Scho
1,615 satisfied customers
Hi, I am putting a 351 windsor and a c4 together. The flywheel
Hi, I am putting a 351 windsor and a c4 together. The flywheel on a 302 is 13 1/4 in. and 14 on the 351. What can I do to mate them up. Is there a company that makes these flywheels or can I change th… read more
Chuck
Chuck
ASE Certified Technician
Vocational, Technical or Trade Scho
1,685 satisfied customers
Set timing..timing chain to ensure proper firing sequence..rebuild
How to set timing chain to ensure proper firing sequence when doing a complete engine rebuild… read more
Brian
Brian
Automotive Service Consultant/Technician
Bachelor Degree
780 satisfied customers
IM GETTING READY TO REBUILD A 1965 289 CID ENGINE.
I''M GETTING READY TO REBUILD A 1965 289 CID ENGINE. COULD YOU TELL ME WHAT TO DO TO GET 0 TO 60 MPH PERFORMANCE. I WILL BORE, NEW CAM, AND WOULD LIKE TO PUT 3X2 BARREL CARBS ON IT. CAN YOU HELP? XXXX… read more
mustangmike
mustangmike
AUTOMOTIVE TECHNICIAN
Vocational, Technical or Trade Scho
492 satisfied customers
1984 ford bronco: v8..bypass..the ecu for distributor
I got a 1984 ford bronco that as a 300 i6, i want to put in a 302 v8 out of 1982 ford van. My question is with this motor how do i bypass the ecu for distributor.… read more
Brian
Brian
Automotive Service Consultant/Technician
Bachelor Degree
780 satisfied customers
1985 ford: a intake from a 1968 ford 302 The cab is..engin..highway
I have a 1985 ford that had carberater trouble. I swaped the 2 barel in for a holly 4 barel and but on a intake from a 1968 ford 302 The cab is new. the engin runs well on the highway but will not idl… read more
j_ramsey
j_ramsey
High School or GED
480 satisfied customers
mustang: rich..im working..old 351 4vhigh perfomance heads..piston
hello my is frank and im building a mustang for raceing i have a 351&302 but i dont no which is better to build.is the older blocks better or the newer blocks can you help me out.is it true that they … read more
Jaxer Smith
Jaxer Smith
Owner
Technical
1,272 satisfied customers
1965 Ford Mustang: cyclinder..My timing is off and my mechanic
I have a 1965 Ford Mustang with a six cyclinder. My timing is off and my mechanic can''''''''''''''''t find the timing codes in any of his book. Can anyone help me? Thank you Brad… read more
Larry
Larry
Technical Editor
Bachelor's Degree
718 satisfied customers
1966 mustang: hose..rad. to water pump cause there on diff
I have a 1966 mustang & put a 302 motor in it,but it has a 289 rad. in it,the question is what rad. hose can i get to reach from rad. to water pump cause there on diff. sides? HELP IF YOU CAN,thanksCu… read more
Don - Mo Lurch
Don - Mo Lurch
Owner
Vocational, Technical or Trade Scho
10,706 satisfied customers
1969 mustang: i replaced the vacuum advance..unleaded..retard..specs
i replaced the vacuum advance on my 1969 mustang.302,2bbl.do i now have to reset the timing,and what should it be set at?does the fact that it now runs on unleaded gas instead of regular mean i have t… read more
Don - Mo Lurch
Don - Mo Lurch
Owner
Vocational, Technical or Trade Scho
10,706 satisfied customers
1985 ford mustang: i rebuilt the engine and carb..vacuum..runs fine
i have a 1985 ford mustang with a 302. i rebuilt the engine and carb. it barely runs with the vacuum advance line hooked up. if i unhook it it runs fine. i have 15 hg at the vacuum line. any ideas wou… read more
HDGENE
HDGENE
6,726 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

25,182 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

29,223 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,591 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,524 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x