Ford

Have Ford questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Ford Questions
I. I have a 2004 F150 4x4 with a 5.4 triton engine that
Hi I have a 2004 F150 4x4 with a 5.4 triton engine that started off with a P0345 and a P0340. a shop replaced spark plugs and camshaft position sensors. They reset monitors was ok for very short time until both codes came back with vehicle stalling and running like crap. I changed camshaft positioning sensors and the VCT solinoids no change. Pulled spark plugs had one spark plug that was missing electrode.I pulled heads off no sign of spark plug electrode or any damge to piston and cylinder. took heads to machine shop to be checked had one bent valve and leaking 25%. so had both heads resurefised and complete valve job and replaced bent valve. I also replaced timing chains tensioniors guides bought crank shaft alignment tool for timing. checked timing like 5 times and its right throws P0345 and P0020 codes now and runs real bad dies back fires misses runs real crapy. I read somebody set the driver side timing chain one tooth retarded back and fixed the problem. I was thinking it was a bad phaser but read that he changed his phasers first before setting timing one tooth back and it wasnt the phasers. I dont know what to do now . I need help please. … read more
Wayne Crawford
Wayne Crawford
3,945 satisfied customers
My truck had intermittent idle. Had it put on code reader
My truck had intermittent idle. Had it put on code reader and replaced both vct solenoid s and both cam position sensors. Runs worse now.… read more
Kenny Z.
Kenny Z.
Ford Senior Master Technician
High School or GED
6,149 satisfied customers
Second opinion] Have an 05 f150 5.4 3valve codes read p0345
Second opinion] Have an 05 f150 5.4 3valve codes read p0345 and p0349, bank2 errors. I replaced cam sensor and both vct solenoids and still running rough. With bank2 vct unplugged and running I throw … read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
10,967 satisfied customers
2005 5.4 F-250 had really worn out timing chains and
2005 5.4 F-250 had really worn out timing chains and phazers. Replaced that and put in new oil pump. Runs good cold. as it warms up it starts idling slower and pretty much dies when you let off the ga… read more
Jared D
Jared D
Shop Supervisor
Bachelor's
2,386 satisfied customers
2004 F150. 200,000 mile, 5.4 engine 4x4. Code P0012. Well
2004 F150. 200,000 mile, 5.4 engine 4x4. Code P0012. Well maintained oil changes every 3000 to 5000 mile. Still getting p0012 code after changing bank 1 (passenger side) VCT solenoid. No engine noises… read more
David Craig
David Craig
OWNER/MECHANIC
Associates
6,895 satisfied customers
Like all 5.4 triton engine mine idles so rough at slow down
like all 5.4 triton engine mine idles so rough at slow down or stop that it sounds like it is going to blow up. I have read every blog concernng this problen and no one has a solution. … read more
HDGENE
HDGENE
6,723 satisfied customers
How are you? Great My 2004 Ford F150 is running bad, F150
It is pulling the following codes: P0340 / P0021 / P0011 / P0345 / P0174 … read more
David Craig
David Craig
OWNER/MECHANIC
Associates
6,895 satisfied customers
I have a 05 fx4 with the 5.4 liter. It has been at local
I have a 05 fx4 with the 5.4 liter. It has been at local dealer now for 3 weeks tracking problems. 1. New timing chains and phasers installed 2. New plugs They found melted harness from top of motor o… read more
A. Penland
A. Penland
Ford Senior Master Technician
Vocational, Technical or Trade School
7,172 satisfied customers
I have 2005 f250 5.4 3valve replaced phasers vct s and timing
I have 2005 f250 5.4 3valve replaced phasers vct s and timing chains. i had a broken guide and a bad phaser codes p0021 originally. Now its runs like crap and I have code p0011 and p0022. I also have … read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
29,223 satisfied customers
Ford F150 5.4 three valve: 04 F150 5.4 Has typical cam phaser
04 F150 5.4 Has typical cam phaser noise. Got A P0340 Code yesterday. Intermitenlly goes to running rough at idle but clears up on acceleration. Will also get a sort of bad "Miss" sometimes only on ac… read more
Wayne Crawford
Wayne Crawford
3,945 satisfied customers
F150: I have my own repair shop but I have found myself out
I have my own repair shop but I have found myself out of options . I have a 2008 f150 recently brought to me by another repair shop. I frequently do work for them when they have problems. They just pu… read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
8,106 satisfied customers
f150 5.4 3 valve: 08 ford f150 5.4 3 valve had a misfire p0306,
08 ford f150 5.4 3 valve had a misfire p0306, on bank 2 obviously, changed coil over to cylinder 5 to see if error code would follow, it did, misfired a few times on the way home from work got home ch… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
29,223 satisfied customers
EXPEDITION: 2006 FORD EXPEDITION 5.4 3V...NEW PARTS-RIGHT CAM
2006 FORD EXPEDITION 5.4 3V...NEW PARTS-RIGHT CAM ROCKER ARM CAM PHASER/LEFT CAM PHASER VCT VALVE AND VALVE BODY CHAIN TENSIONER AND OIL PUMP AND OIL/FILTER...2 FORD TECH,FORD AND AFEW OTHER TECHS CAN… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
29,223 satisfied customers
vcts and cam sensors, now im getting Misfires any suggestions
P0012 and P0022 changed both VCT's and cam sensors, now im getting Misfires any suggestions?… read more
davehop
davehop
Diagnostic Technician
Ford Master Technician. Hyundai Master Technician
1,503 satisfied customers
2004 ford f150: fuel filter..park or neutral, stalls in drive..55mph
asked another for mechanic from similar website....have changed out fuel filter, throttle sensor and camshafts. 2004 ford f150 was fine one day, stalling the next. Fine when in park or neutral, stalls… read more
A. Penland
A. Penland
Ford Senior Master Technician
Vocational, Technical or Trade School
7,172 satisfied customers
2005 Ford F-150: with 5.4 litre..slight hesitation (..towing..cruising
I have a 2005 Ford F-150 with 5.4 litre. The truck has been progressively running worse and worse. It started out with a slight hesitation (like I was towing too much) when just cruising. Now it makes… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
25,022 satisfied customers
Drives..Jus replaced the vct solenoid on the bank 2 drivers side..cam
i have a p0022 code and it runs and drives bad. Jus replaced the vct solenoid on the bank 2 drivers side and still runs the same way. i was told by another mechanic that the problem is the cam phaser … read more
Dieseljunky2
Dieseljunky2
Locomotive Mechanic
Ford Certified Technician
409 satisfied customers
2004 F150 XLT 5.4 triton - w/ codes P0012, P0316, and P0340.
2004 F150 XLT 5.4 triton - w/ codes P0012, P0316, and P0340. Took the truck to a local Ford dealership and they recommended to trash it and replace with a new truck. Is there something more logical to… read more
CTFordTech
CTFordTech
Auto Technician
Vocational, Technical or Trade Scho
4,894 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

25,022 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

29,223 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,591 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,524 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x