Ford

Have Ford questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Ford Questions
2006 ford freestar. Drove about 13 miles van started bucking
2006 ford freestar. Drove about 13 miles van started bucking l, misfiring, and eventually shut off. Would run a sec and die. Had towed home. Starts and runs fine, but I won't take it anywhere for fear… read more
HDGENE
HDGENE
6,597 satisfied customers
ford Explorer 4x4: 1998 ford explorer failed smog test with
1998 ford explorer failed smog test with code P0340 camshaft position A sensor circuit... bank 1 or single sensor. what does it mean (?) in reference to what and where it is. how can it be repaired?… read more
Eric
Eric
Retired
N/A
33,577 satisfied customers
Ford F350 SuperDuty Pickup 4x4: Ive got a 2001 ford f350 with
I've got a 2001 ford f350 with the 7.3 It cut out the other night on the way home. Thankfully close enough to coast into the driveway. Ever since then it will not start. I replaced the cam position se… read more
gtnby2
gtnby2
Driver
Associate Degree
212 satisfied customers
2004 ford Explorer: code reader..max and throttle position sensor
2004 ford Explorer, 4.6 L / Light illuminate for "Fail Safe", This started after battery replaced, Stero will not work, windows not working, engine will only idle, code reader indicates throttle posit… read more
Mat
Mat
Ford Senior Master Technician
Associate Degree
950 satisfied customers
2003 f-350: 6.0 diesel..at highway speed..While coasting..engaged
Origanal problem ,2003 f-350 6.0 diesel , at highway speed , trans goes to neutral. While coasting down drive position acted like neutral. At about 40 trans engaged in a lower gear. continued at 2800 … read more
Pavlin Koev
Pavlin Koev
Diagnostic Technician
High School or GED
1,069 satisfied customers
2007 ford explorer: 4wd 6 cyl die..highway I change the fuel filter
my 2007 ford explorer 4wd 6 cyl die when I was on the highway I change the fuel filter,the crankshaft position sensor and the camshaft position sensor and still not running I also find out that is no … read more
chris
chris
Ford tech at a dealer
Associate Degree
3,519 satisfied customers
2003 Ford f350: Camshaft Position Sensor..V8..Turbo Diesel
How to change the Camshaft Position Sensor in a 2003 Ford f350 V8 Turbo Diesel, and a location of where the sensor is?… read more
Anthony
Anthony
Master Automobile Technician
Vocational, Technical or Trade Scho
11,778 satisfied customers
2004 F-150 Lariat: Check engine light..code reader..scanner
I have a 2004 F-150 Lariat 5.4 Triton Supercrew with 17,943 miles. Check engine light is on, temperature gauge does not work and A/C will not blow cold (functions normally in all respects except compr… read more
CTFordTech
CTFordTech
Auto Technician
Vocational, Technical or Trade Scho
4,894 satisfied customers
1997 Ford F150: 4.6 code 340 came up for the crank sensor..restart
I have a 1997 Ford F150 with a 4.6 code 340 came up for the crank sensor. I change the sensor and erased the code and took it for a drive. When I shut the truck off and went to restart it the code was… read more
Al Smitty
Al Smitty
Associate Degree
660 satisfied customers
2004 Ford: it towed to the dealership last week..hood..fuel pressure
Hello I tired to start my 2004 Ford 6.0 diesel and it spins over and won't start, my odb reader says the " cam shaft signal out put circuit open" Code p2614. I had it towed to the dealership last week… read more
AutoDoc
AutoDoc
Senior Master Technician
Vocational, Technical or Trade Scho
204 satisfied customers
1999 Ford F250: 7.3L diesel..about 10-30 minutes to restart
I have a 1999 Ford F250 7.3L diesel. It will start and run for about 3-4 miles then just shut off. Have to wait about 10-30 minutes to restart. No water in fuel. Have changed fuel filter and blown out… read more
Fordanswerman
Fordanswerman
Ford Senior Master Technician retired
Associate Degree
3,304 satisfied customers
My 2000 F250 7.3l Diesel wont start. I changed the cam Position
My 2000 F250 7.3l Diesel won't start. I changed the cam Position Sensor and it started. Now the Service Engine soon light stays on and the Wait to Start light does not go off. Any suggestions?… read more
Chris
Chris
Service Manager/Lead Technician
High School or GED
64 satisfied customers
88 Ford Windstar: check engine light..Camshaft Position Sensor
My 88 Ford Windstar L3.0 got check engine light on with P0340 Camshaft Position Sensor Circuit Malfunction. What can be the possible cause and any advise on how much it costs to fix it?… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
25,182 satisfied customers
What do i do to fix my ford explorer.. i am seeing code p0340..
what do i do to fix my ford explorer.. i am seeing code p0340.. meaning camshaft positon sensor malfuvtion… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
25,182 satisfied customers
2001 Ford F150: obd code reader (code p0340)..Crankshaft Sensor
I have a 2001 Ford F150 with the 5.4 engine. It starts hard (at times) and when driving it will idle high or loose power. Given the OBD code reader (code P0340), I believe that I've got a bad Cranksha… read more
john
john
High School or GED
254 satisfied customers
2000 F-250: Turbo..Cam sensor..loses power..it goes down the road
I have a 2000 F-250 Diesel (7.3 Turbo). I Keep having to replace my Cam sensor (3 times). The truck loses power (while it goes down the road, and also will not start. It has been towed twice. My truck… read more
Keith Allen
Keith Allen
AUTO / DIESEL MECHANIC
Vocational, Technical or Trade Scho
116 satisfied customers
2000 ford f-250: pickup..driving home..service engine soon light came
I have a 2000 ford f-250 power stroke pickup. The other night driving home, service engine soon light came on. No problems, the next a.m. had block heater pluged in. Started truck, sounded different l… read more
Marc
Marc
fleet supervisor
Vocational, Technical or Trade Scho
1,140 satisfied customers
ford: fuel peddle down half way in order do start..glow plug and relay
2001 7.3 powerstroke. have to hold fuel peddle down half way in order do start when cold. alredy took to ford and they fixed glow plug and relay and said it was fixed but its not. once started you hav… read more
Geordie
Geordie
Mobile Mechanic
Ceritficate of Pre-Vocational Educa
290 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

25,182 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

29,223 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,591 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,524 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x