Ford

Have Ford questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Im having issues with. 1998 Ranger intermittentely stalling…

Customer Question
Im having issues with. 1998...
Im having issues with. 1998 Ranger intermittentely stalling coil packs have been replaced and also Maf Sensor cause it was throwing a code , ive replaced it clearrd the Fault but it came again , i have a fuel pressure tester hooked up its showing 55Psi wich a think is allright. , when i depress accelerator it revs ok then the other times it kinda wanna Bogs and looses power
Submitted: 9 months ago.Category: Ford
Show More
Show Less
Ask Your Own Ford Question
Answered in 5 minutes by:
11/28/2017
Ford Mechanic: David Craig, Auto Mechanic replied 9 months ago
David Craig
David Craig, Auto Mechanic
Category: Ford
Satisfied Customers: 6,324
Experience: owner/mechanic at 3D Automotive
Verified

Hi my name is ***** ***** I'll be more than happy to assist you. Please allow me a few minutes to review your information. Thank you

Ask Your Own Ford Question
Ford Mechanic: David Craig, Auto Mechanic replied 9 months ago

what size engine? what is the fault code?

Ask Your Own Ford Question
Customer reply replied 9 months ago
2.5Liter 4 cylinder
Customer reply replied 9 months ago
The Code is a P1100
Ford Mechanic: David Craig, Auto Mechanic replied 9 months ago

ok

Ask Your Own Ford Question
Customer reply replied 9 months ago
Hello david i have my scanner hooked up , on live data evrything seems fine
Ford Mechanic: David Craig, Auto Mechanic replied 9 months ago

does the maf change when giving the engine rpm's?

Ask Your Own Ford Question
Customer reply replied 9 months ago
it does change
Ford Mechanic: David Craig, Auto Mechanic replied 9 months ago

then theres nothing wrong

Ask Your Own Ford Question
Customer reply replied 9 months ago
but it keeps having the same issue stalling and bogging fuel pressure as i mentioned seem to be ok , between 50 and 60 psi
Customer reply replied 9 months ago
sir remember the Maf was replaced
Ford Mechanic: David Craig, Auto Mechanic replied 9 months ago

Hows it going?

Ask Your Own Ford Question
Customer reply replied 9 months ago
Hello Dave sorry to take Long , we were left dissconnecteed due to repair and stuff due to last hurricane, but going back ,i wass able to rreplace the fuel pump wich was in bad state , cloggedd with broken strainer , but its doing the same
Ford Mechanic: David Craig, Auto Mechanic replied 9 months ago

ok, standby

Ask Your Own Ford Question
Ford Mechanic: David Craig, Auto Mechanic replied 9 months ago

ok, whats the pressure now with a new pump?

Ask Your Own Ford Question
Customer reply replied 9 months ago
Hello im getting 65
Ford Mechanic: David Craig, Auto Mechanic replied 9 months ago

ok....

Ask Your Own Ford Question
Ford Mechanic: David Craig, Auto Mechanic replied 9 months ago

so you now have 65 and it still no go?

Ask Your Own Ford Question
Customer reply replied 9 months ago
Hello Daniel , yes its doing the same same issue
Ford Mechanic: David Craig, Auto Mechanic replied 9 months ago

ok, standy a few

Ask Your Own Ford Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a ford mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Ron Your Own Question
Ron
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 25,022
25,022 Satisfied Customers
Experience: 23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Ron is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

25,022 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

29,223 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,591 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,524 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Related Ford Questions
2002 ranger 3.0. I have replaced the following. Fuel filter,
fuel filter, MAF, spark plugs, wires, O2 sensors, coil pack. Idles good but when put into drive it bogs down, shakes spits. It looses power. As you drive it gets worse and cuts off. It will not pull a hill. Any help I would appreciate. … read more
davehop
davehop
Diagnostic Technician
Ford Master Certified Technician
1,171 satisfied customers
A problem with my 2004 ford f150 4.6l V8 with trouble codes
Hello, Im Having a problem with my 2004 ford f150 4.6l V8 with trouble codes and intermittent misfires … read more
Steve W
Steve W
Line Technician
Vocational, Technical or Trade Scho
1,968 satisfied customers
Is there e proper way to test or Bypass DPFE sensor on a
Hello is there e proper way to test or Bypass DPFE sensor on a Ford Ranger 2.5 4Cyl 1998 , car has been jerking rough idle , replaced Coils , Wires, Plugs , it had a Maf Sensor Code , replaced and cod… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
25,022 satisfied customers
Our 1998 Ford Ranger won't start. It started fine yesterday.
Our 1998 Ford Ranger won't start. It started fine yesterday. Today, it cranks over good, but won't start. Fuel pump is working, 60 psi on the fuel rail. All the fuses have been checked. What's our nex… read more
AMEDEE
AMEDEE
AUTOMOTIVE TECHNICIAN
Vocational, Technical or Trade Scho
9,105 satisfied customers
I have a 2001 Ford Mustang 3.8l with 82,000 A few days ago
I have a 2001 Ford Mustang 3.8l with 82,000 A few days ago it started up rough and ran rough for 15 seconds. Approx. soon after it kicked will driving and started running rough and hesitating at low r… read more
APenland
APenland
Ford Senior Master Technician
Associate in Industrial Management
3,186 satisfied customers
I have a 2005 Ford Five Hundred that I just had the
I have a 2005 Ford Five Hundred that I just had the transmission replaced and also replaced the throttle body. I thought I did the relearning process of the system, but not sure. So when I replaced th… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
29,223 satisfied customers
i have a 1998 f150 with a 5.4 liter engine. it has no power
i have a 1998 f150 with a 5.4 liter engine. it has no power and when you take from a stop light it jerks or shakes. i changed the coils about a month ago for multiple misfires but its not setting any … read more
James
James
Bachelors degree automotive technology with minor in diesel
3,578 satisfied customers
ranger: 1998 ford ranger 4.0 , 4x4 after coming up to operating
1998 ford ranger 4.0 , 4x4 after coming up to operating temp climbing an incline it will start to buck , misfire, and stall if you accelerate gently it will gradually begin to level out, not putting o… read more
James
James
Bachelors degree automotive technology with minor in diesel
3,578 satisfied customers
Rev..throttle body..misfire in cylinder 4 and 02 sensors malfunction
engine runs really rough and doesn't idle. when u can get it to rev up a bit it makes a popping noise; sounds like it is coming from the throttle body. computer codes tell me misfire in cylinder 4 and… read more
Marty
Marty
Vocational, Technical or Trade Scho
568 satisfied customers
1988 Ranger: 2wd..It starts fine (in-tank fuel pump..stalled..speeds
Hi -- I have an 1988 Ranger 2wd. It starts fine (in-tank fuel pump) just replaced, accelerates OK....but idles rough (stalled once today idiling low -- started back up ok), has trouble past speeds of … read more
SMTBob
SMTBob
Senior Master Technician
Vocational, Technical or Trade Scho
93 satisfied customers
2004 FORD F150 LARIAT: 5.4L..TRITON..VIN..CUTTING OUT AND STALLING, IT
HI IM WORKING ON A 2004 FORD F150 LARIAT WITH A 5.4L 3 VALVE TRITON VIN CODE 5. IT CAME IN CUTTING OUT AND STALLING, IT HAD CODES P2104, AND P2111. JUST LIKE A TYPICAL THROTTLE BODY PROBLEM. I REMOVED… read more
TIM THE TECH
TIM THE TECH
Associate Degree
283 satisfied customers
Check engine light..it idles and initial acceleration..fuel filter
my check engine light continues to come on. The truck has a small shimmy as it idles and initial acceleration. I changed the fuel filter and air filter which helped tremendously but still does it. Whe… read more
eauto
eauto
self employed
High School or GED
74 satisfied customers
1993 Ford Taurus: cam sensor..coil pack..New plugs..ok.Any ideas
I own a 1993 Ford Taurus 3.2L SHO.No spark number 6 cylinder.Replaced cam sensor and coil pack.New plugs and wires.Tested wire and it is ok.Any ideas?… read more
Dieseljunky2
Dieseljunky2
Locomotive Mechanic
Ford Certified Technician
310 satisfied customers
99 f-150: bog down..feather..fuel filter, egr sensor, maf sensor
What would cause my 99 f-150 4.2 to bog down when i stomp on the gas. I have to feather it to get going fast . I just replace the fuel filter, egr sensor, MAF sensor, and the EGR itself is OK.… read more
fix that car
fix that car
High School or GED
404 satisfied customers
91 ranger: Im working..someone has swapped engines in. the engine
Im working on a 84 ranger for a friend of mine that someone has swapped engines in. the engine is the best I can tell a 4.0 from an 91 ranger. who ever did the swap made it look factory and really see… read more
Brian
Brian
Automotive Service Consultant/Technician
Bachelor Degree
780 satisfied customers
My ford Ranger Loses power when i am going up. RPM and speed
My ford Ranger Loses power when i am going up hill. RPM and speed go down. No accelaration but also very low RPM. I changed air filter, oil, tune up but still the same problem. check engin light goes … read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
25,022 satisfied customers
Ford ranger: 2000 106K mi, std trans, over-revs..clutch..accelerate
my ford ranger 2000 106K mi, std trans, over-revs when i come to a stop and clutch is depressed. also at times when i accelerate from a stop it bogs down and i have to take ft of accelerator and gradu… read more
POWERSTROKE
POWERSTROKE
DIESEL MASTER TECH
Associate Degree
1,040 satisfied customers
2001 Ford Expedition: I can not accelerate..2000rpm..bogs down..stall
My 2001 Ford Expedition has the following problem? When I drive it I can not accelerate over 2000rpm withouit loosing power. If I try to push the gas pedal down to accelate the vehicle bogs down and f… read more
John Miller
John Miller
Associate Degree
164 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x