Ford

Have Ford questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Ford Questions
I have installed a new master cylinder on a Ford Focus 2009
Hi, I have installed a new master cylinder on a Ford Focus 2009 with ABS and Stability. Bench bled and installed. Full bleed 2x and pedal is still soft. It will firm up with 3 pumps with engine on. An… read more
Gabriel Grey
Gabriel Grey
Master Service Technician
Associates
457 satisfied customers
1994 F-150. Start engine, put foot on brake, shift into
1994 F-150. Start engine, put foot on brake, shift into drive. Remove foot, but brake pedal stays down and brakes stay applied, can't move. CAn pull up brake pedal with foot, brakes then release. No f… read more
David Craig
David Craig
OWNER/MECHANIC
Associates
6,718 satisfied customers
Ron. I have a 2002 FordFocus .One of the brake linesbroke. I
Hi Ron. I have a 2002 FordFocus .One of the brake linesbroke. I replaced both brake lines in the front . i bled all four calipers but the brakes lose preasure when I start the car. I was told I can bl… read more
HDGENE
HDGENE
6,658 satisfied customers
Ford F-350: I have a 1990 Ford F-350 with 7.5 liter engine,
I have a 1990 Ford F-350 with 7.5 liter engine, dual rear wheels and 2WD. I have replaced both front calipers, rotors and pads, rear shoes and wheel cylinders, master cylinder, vacuum booster and prop… read more
HDGENE
HDGENE
6,658 satisfied customers
95 F250 7.3 cruse: Glenn: 95 F259 2wd 7.3 Had good brakes
Glenn: 95 F259 2wd 7.3 Had good brakes before rear brake job replaced shoes wheel cylinders turn drums. Got truck back truck stop but peddle creeps to floor. Bleed Rear wheels again no luck. Replaced … read more
Eric
Eric
Retired
N/A
33,784 satisfied customers
f250: am working on a 1977 ford f250 4x4 frankenstein has
am working on a 1977 ford f250 4x4 frankenstein has stock front end 1989 f350 dually rear .I have replaced front calipers (loaded from napa supreme) master cyl. and rear shoes as wheel seal was leakin… read more
Mike V.
Mike V.
Auto Service Technician
Subaru and Nissan factory training.
1,591 satisfied customers
expedition: I have a 97 Ford Expedition and I have just replaced
I have a 97 Ford Expedition and I have just replaced the master cylinder, new rotors, ceramic pads and new calipers. The brake stiffens up when the vehicle is not running but when running after hours … read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
29,223 satisfied customers
Good afternoon, I have a 1968 ford galaxie 500. I cant get
Good afternoon, I have a 1968 ford galaxie 500. I can't get my brake pedal to get hard it goes all the way to the floor. I replaced all the brake lines, new master cylinder, new proportioning valve, c… read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
8,069 satisfied customers
ford expedition: master cylinder..bled..leaks..pedal still bleeds
02 ford expedition 4.6. Front rotors replaced, rear rotors turned within specs, all pads replaced, master cylinder replaced and all air bled out, no visible fluid leaks but pedal still bleeds down wit… read more
Edward
Edward
Professional at Justanswer.com
Associate Degree
3,646 satisfied customers
68 falcon: rock hard, but not stopping well, replaced master cy..drums
i have a 68 falcon 289 2 bb manual brakes. the brakes are rock hard, but not stopping well, replaced master cy all brake cys are good shoes are good drums not scored, what do you see we are missing… read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
8,069 satisfied customers
pedal..leaks..master cylinder, but I am still having the same problem
2 days ago I started having a problem with my brakes,when trying to stop the pedal would slowly go to the floor. I do not see any leaks. The front brakes were replaced a couple months ago, so I replac… read more
SuperBob
SuperBob
Ford dealer senior master technician
Vocational, Technical or Trade Scho
2,603 satisfied customers
96 f350. new booster,master cylinder. reblead system.
96 f350. new booster,master cylinder. reblead system. brakes are spongy. when running brakes go to the floor… read more
Anthony
Anthony
Master Automobile Technician
Vocational, Technical or Trade Scho
11,778 satisfied customers
2001 ford windstar: brake master cylinder..abs modulator or abs valves
I need to replace the brake master cylinder in a 2001 ford windstar, front disk, rear drum, ABS. Do I need to do any special bleeding for the ABS modulator or ABS valves or the nomal wheel bleed is en… read more
RJ
RJ
Ford Tech
High School or GED
1,573 satisfied customers
1997 f150: brake calipers, hoses, pads, master cylinder..pedal
I have a 1997 f150. just replaced brake calipers, hoses, pads, master cylinder, and bled all of the brakes. There is no pedal pressure at all. what else could be the problem… read more
kalamykid
kalamykid
Pactor automotive
Vocational, Technical or Trade Scho
5,459 satisfied customers
1995 f 250: brake pedal..engine running..replaced master cyl..wheels
1995 f 250 brake pedal goes to floor with engine running, but not with key off. replaced master cyl, bled all lines at wheels, but still same results… read more
Shawn
Shawn
Self Employed
Vocational, Technical or Trade Scho
360 satisfied customers
1994 ford tempo: master cylinder..brake booster..only get brake fluid
i have a 1994 ford tempo. i have replaced the master cylinder and the power brake booster. while bleeding the master, i can only get brake fluid out of the rear 2 ports of the master. nothing at all h… read more
Vincent
Vincent
Automotive Technician
High School or GED
808 satisfied customers
92 probe: cyl..weve replaced master cylinder..leaks..pedal
have a 92 probe 4 cyl-nonturbo. we've replaced master cylinder, power brake booster, bled, checked lines (no leaks). STill do not have pedal pressure. the pressure only occurs when pedal is mostly dep… read more
cardoctor1989
cardoctor1989
Shop owner, all make and models r
Vocational, Technical or Trade Scho
144 satisfied customers
ford aerostar: 1993..wheel drive..sits..drivers seat..brake pedal
What is the method to bleed air out of the brake line for the rear axle for a 1993, Ford Areostar with 4.0 LXXXXX? I tried the method where one person sits in the drivers seat, push down on the brake … read more
Eric Kohnke
Eric Kohnke
mechanic
TECH SCHOOLING IN MECHANICS
42 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

25,182 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

29,223 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,591 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,524 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x