Ford

Have Ford questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Ford Questions
I. I have a 2004 F150 4x4 with a 5.4 triton engine that
Hi I have a 2004 F150 4x4 with a 5.4 triton engine that started off with a P0345 and a P0340. a shop replaced spark plugs and camshaft position sensors. They reset monitors was ok for very short time until both codes came back with vehicle stalling and running like crap. I changed camshaft positioning sensors and the VCT solinoids no change. Pulled spark plugs had one spark plug that was missing electrode.I pulled heads off no sign of spark plug electrode or any damge to piston and cylinder. took heads to machine shop to be checked had one bent valve and leaking 25%. so had both heads resurefised and complete valve job and replaced bent valve. I also replaced timing chains tensioniors guides bought crank shaft alignment tool for timing. checked timing like 5 times and its right throws P0345 and P0020 codes now and runs real bad dies back fires misses runs real crapy. I read somebody set the driver side timing chain one tooth retarded back and fixed the problem. I was thinking it was a bad phaser but read that he changed his phasers first before setting timing one tooth back and it wasnt the phasers. I dont know what to do now . I need help please. … read more
Wayne Crawford
Wayne Crawford
3,945 satisfied customers
Its an 06 ford f150 5.4 replaced the crank sensor and cam
its an 06 ford f150 5.4 replaced the crank sensor and cam sensor but the code reader says crankshaft sensor bank A … read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
10,967 satisfied customers
A 2004 ford F150 4X4 5.4 liter engine came in with rough
a 2004 ford F150 4X4 5.4 liter engine came in with rough idle complaint. Checked for vacuum leaks-none. Replaced the intake rudder actuator motor due to a code. Checked compression in cylinders; 1,2,3… read more
Scott W.
Scott W.
Diesel, Automatic trans, full line tech
Associate Degree
3,706 satisfied customers
Which side is bank 2 on 2004 f150 5.4 engine, 220,000 auto
yes im fixing it so far ive replaced 2 cam sensors … read more
Ray M.
Ray M.
Diesel Technician
Vocational, Technical or Trade School
3,074 satisfied customers
I cahnegd the camshaft .lifters and the roller rokers on my
I cahnegd the camshaft .lifters and the roller rokers on my sons 5.4. It ran perfectly, physical timing is right. When it warms u it runs rough and kills at the stop. Dont know what might caused that?… read more
HDGENE
HDGENE
6,725 satisfied customers
I was told I need a camshaft position sensor and I went to
i was told I need a camshaft position sensor and I went to the parts store and they said they recommend I replace both and I did not know I had two. do you know were the are located … read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
25,182 satisfied customers
04 f150 sputters and dies when pressing gas pedal from idle.
39;04 f150 sputters and dies when pressing gas pedal from idle. … read more
Jaybird61
Jaybird61
Master Automotive Mechanic
2,624 satisfied customers
It died and wont start, No battery looks good seems like it
No battery looks good seems like it isnt getting fuel, pump turns on getting an DTC E013 code from dash … read more
A. Penland
A. Penland
Ford Senior Master Technician
Vocational, Technical or Trade School
7,179 satisfied customers
My 1999 F150 has codes 1131 and 1132. At idle in drive with
My 1999 F150 has codes 1131 and 1132. At idle in drive with brake on it sputters and gets worse the longer you sit.It also sputters from 1200 rpm's up as you accelerate once your're at 2000 rpm's it s… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
55,625 satisfied customers
Ford F-150 Lariat: I have a 2009 F150 with 60,000 mi on it.
I have a 2009 F150 with 60,000 mi on it. when i left for work, 30 sec. after it started, it died. It starts right back up and died shortly after again. It runs smooth and you can rev it up but dies ab… read more
James
James
Bachelors degree automotive technology with minor in diesel
3,578 satisfied customers
ford: 07 f150 5.4 3valve starts and dies runs for 3sec then
07 f150 5.4 3valve starts and dies runs for 3sec then dies again Injection only on cranking… read more
Steve
Steve
Ford tech Specializing in electronics
Vocational, Technical or Trade School
6,745 satisfied customers
Ford F150: 2004 F150 5.4 3v, new long block. Runs good with
2004 F150 5.4 3v, new long block. Runs good with mass air flow sensor unplugged. Runs very rough when plugged in. Only codes present ar p0102, p0104, p0113, p1000 and p2106.… read more
Kenny Z.
Kenny Z.
Ford Senior Master Technician
High School or GED
6,153 satisfied customers
2004 f150: 4x4..can i find the wire to install a tac with shift light
I have a 2004 f150 4.2 heritage 4x4 it dont have a tac. where can i find the wire to install a tac with shift light. no one seems to know at local auto stores ....Thanks… read more
kalamykid
kalamykid
Pactor automotive
Vocational, Technical or Trade Scho
5,511 satisfied customers
2004 f150: the 5.4..000 miles..running rough..Ford dealer..cylinder
I have a 2004 f150 w/ the 5.4 3v. with 125,000 miles. Last night driving home the engine sputtered @ 40mph and continued running rough. I took it to the Ford dealer they diagnosed a dead # XXXXX cylin… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
55,625 satisfied customers
2004 F150: manifold..I see the 2 knock sensors bolted to the block
I have a 2004 F150 with a 3v 5.4l. I am replacing the engine and bought a used 2004 5.4l 3v from an F150. When I removed the manifold off my engine I see the 2 knock sensors bolted to the block. When … read more
mopar money
mopar money
Vocational, Technical or Trade Scho
181 satisfied customers
Ford F150: check engine light came..Position Sensor..Voltage
I have a Ford F150 Crew Cab. The check engine light came on (steady) I took it to Advanced Auto and did the free diagnosis. It came up P2106 TAC System forced Limited Power, P2135 TPS/Petal Position S… read more
Ed
Ed
Vocational, Technical or Trade Scho
114 satisfied customers
2004 ford f150: 000 miles..valve rough idle, dies at times..runs rough
2004 ford f150 5.4 3 75,000 miles. valve rough idle, dies at times. runs rough at any speed. codes p0011& p0340. cam advance pid or right head intermittently goes to 694.0 and cam error goes as high a… read more
POWERSTROKE
POWERSTROKE
DIESEL MASTER TECH
Associate Degree
1,062 satisfied customers
2004 ford f150: 2wd..auto zone..a misfire in #8 cycl..cyl
I have a 2004 ford f150 2wd 5.4lt. I took it to auto zone and had a ob2 test done and the code came back 0316 and 0308 which is a crank shaft sensor, and a misfire in #8 cycl. switched #5 cyl. fuel in… read more
drobbi
drobbi
Vocational, Technical or Trade Scho
76 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

25,182 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

55,625 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,591 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,524 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x