Ford

Have Ford questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Not seeing any dots ..notches any thing on this piston

Customer Question
showing it faces a certain...
Not seeing any dots ..notches any thing on this piston showing it faces a certain way?
Submitted: 11 months ago.Category: Ford
Show More
Show Less
Ask Your Own Ford Question
Answered in 4 minutes by:
9/8/2017
Ford Mechanic: Mike S., ASE Certified Technician replied 11 months ago
Mike S.
Mike S., ASE Certified Technician
Category: Ford
Satisfied Customers: 8,136
Experience: ASE Certified Master Technician
Verified

Hi, I am Mike, welcome. I'm reviewing your question.

Ask Your Own Ford Question
Ford Mechanic: Mike S., ASE Certified Technician replied 11 months ago

Does the top have any cutouts for the vales like on a domed piston?

Ask Your Own Ford Question
Ford Mechanic: Mike S., ASE Certified Technician replied 11 months ago

Can you post a few photos of it?

Ask Your Own Ford Question
Customer reply replied 11 months ago
no its a cupped piston no marks ..nothing
Ford Mechanic: Mike S., ASE Certified Technician replied 11 months ago

Can you post a few photos of it?

Ask Your Own Ford Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a ford mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Ron Your Own Question
Ron
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 25,022
25,022 Satisfied Customers
Experience: 23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Ron is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

25,022 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

29,223 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,591 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,524 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Related Ford Questions
Does anyone know for sure how the rods are positioned in the
does anyone know for sure how the rods are positioned in the 4.0 sohc engine in a 2001 ranger? I didn't pay that much attention when I took it apart because every engine I took apart had the rods mark… read more
HDGENE
HDGENE
Master Technician/Lead Technician
Associate Degree
2,835 satisfied customers
Ford: I need help w timing my 5.4l 3v 2005. Both phasers have
I need help w timing my 5.4l 3v 2005. Both phasers have an L with an arrow. Replaced chains and guides. Set crank at 12 on key way used dot for single link and used the L with arrows for double link o… read more
Kenny Z
Kenny Z
Ford Senior Master Technician
High School or GED
16 satisfied customers
FORD escort: cranck spun the teeth out of the timing belt..tdc
I have a97 FORD escort the cranck spun the teeth out of the timing belt,I am trying to get time im 180% off,How can i till tdc.… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
25,022 satisfied customers
escort lx: Replacing timing belt...step by step procedure
1993 for escort lx 1.9 auto. Replacing timing belt. Can some one give me a step by step procedure. Chiltons manual is no help. Crank pulley has a key way ,a notch and a paint dot on it . Every book I … read more
b-kitchener
b-kitchener
Ford dealer senior master technician
Vocational, Technical or Trade Scho
206 satisfied customers
there two timing mark indicators on the camshaft sproket?..rebuilt
Why are there two timing mark indicators on the camshaft sproket? One is a diamond and the other a triangle. I just installed a rebuilt head on the engine and having truble figuring out the exact timi… read more
SuperDave
SuperDave
auto technician
101 college hrs
867 satisfied customers
4.6L triton engine that was fitted with a new cyl...1 piston..intake
i have a 4.6L triton engine that was fitted with a new cyl. head . facing the engine up front the no. 1 piston on the left side is already up with intake , exhaust valves closed . how will the configu… read more
Steve
Steve
Ford tech Specializing in electronics
Associate Degree
1 satisfied customers
ford: rebuilding..pistons & connecting rods..hard to rotate the crank
I am rebuilding a ford 302 roller. After installing the pistons & connecting rods it is very hard to rotate the crank. Is there a front and back side on the connecting rods? I purchased motor after it… read more
Dieseljunky2
Dieseljunky2
Locomotive Mechanic
Ford Certified Technician
310 satisfied customers
1999 Escort: rebuild..seat..Im replacing the head, pistons and rods
Hello Gentlemen, 1999 Escort 2.0 SOHC rebuild - my daughter's car had the famous intake valve seat drop. I'm replacing the head, pistons and rods. I have cleaned out everything, including the intake m… read more
TIM MOHR
TIM MOHR
SHOP OWNER
Master's Degree
8,037 satisfied customers
1989 Ford: V6 engine..Im thinking..maybe the camshaft and crankshaft
I just finished doing on my 1989 Ford 3.0 V6 engine an overhaul myself, and the engine is popping and does not have power at all. I'm thinking that maybe the camshaft and crankshaft were set up wrong.… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
25,022 satisfied customers
98 ford ranger: im trying to replace a timing belt..stering
I'm trying to replace a timing belt on a 98 ford ranger and I[ haveing trouble getting the power stering pump off… read more
EMRSR
EMRSR
High School or GED
138 satisfied customers
2003 Mustang: problem in compressing rear caliper piston..tool..pads
Having problem in compressing rear caliper piston on 2003 Mustang Mach I. Using the brake tool to turn piston while compressing but cannot get the piston fully compressed ... not enough clearance to i… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
29,223 satisfied customers
95 ford: 3.0 engine..there is letters on the cap and the matching rod
HELP I am putting a 95 ford 3.0 engine together I bought it apart,im not sure how the pistons go in ,no marks on top of the pistons, on the sides of the rods there is a small nob on it there is letter… read more
ase_master327
ase_master327
Owner & Student
High School or GED
3,214 satisfied customers
1999 ford: conecting rods in a 5.4l spercharged engine..svt
which way do i turn the conecting rods in a 5.4l spercharged engine during rebuild(1999 ford svt lightning?… read more
Jaxer Smith
Jaxer Smith
Owner
Technical
1,267 satisfied customers
92 ranger: the oil holes on the rods face the center of the block
92 ranger 2.9 engine ...basket case ..do the oil holes on the rods face the center of the block?… read more
lostrider
lostrider
lead technician/working shop foreman
Vocational, Technical or Trade Scho
2,958 satisfied customers
1983 f150: tdc..distributor..teeth on the crank and cam gears look ok
1983 f150 4x4 straight six step side manual trans..dilema..timing is way off cannot align it using the mark on the balancer/crank pulley..pulled cover and aligned gear marks and notch on balancer will… read more
tthearch1
tthearch1
Vocational, Technical or Trade Scho
200 satisfied customers
Mustang: alignment..heads..crank..the marks for the cam sprockets
hello, im trying to set up my timing chians on my 4.6 mustang and im unsure where all the alignment marks are on the heads to make sure cams are lined with the crank....i do know that the crank gear i… read more
Marc
Marc
fleet supervisor
Vocational, Technical or Trade Scho
1,140 satisfied customers
Proper installation of Ford 4.0 connecting rods ... both
Connecting rod oil squirt holes and/or rod orientation, 1991 Ford 4.0 (X engine ID - OHV). Had new pistons pressed and want to verify correct rod orientation. Which direction do the oil squirt holes f… read more
Tim Basham
Tim Basham
auto repair, shop foreman, tech trainer
Vocational, Technical or Trade Scho
500 satisfied customers
94 ford probe gt: you compress the rear brake piston..abs
how do you compress the rear brake piston on a 94 ford probe gt with 4 wheel disk abs brakes… read more
Eric Kohnke
Eric Kohnke
mechanic
TECH SCHOOLING IN MECHANICS
42 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x