How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chad Farhat Your Own Question
Chad Farhat
Chad Farhat, ASE Certified Technician A6 - Electrical / Electronic systems A7 Heating / Air conditioning systems
Category: Ford
Satisfied Customers: 3942
Experience:  Owner at Carolina Auto Service & Sales , 20 years experience in Foreign & Domestic Vehicles
45790705
Type Your Ford Question Here...
Chad Farhat is online now
A new question is answered every 9 seconds

I have a 2011 ford escape I changed the battery after that

Customer Question

I have a 2011 ford escape I changed the battery after that the abs , brake warning light air cond. blows warm door open all come on then when u drive alittle all goes off an works fine for about 3 minute and all comes back on it does it several time all I did was change battery
Submitted: 1 month ago.
Category: Ford
Expert:  Chad Farhat replied 1 month ago.

Hi, I'm Chad. Welcome to JustAnswer. I'm reviewing your question and I will be posting your reply ASAP.

Expert:  Chad Farhat replied 1 month ago.

Lets try resetign and then we go from there ,we moght need a factory scaner or equivalent if that does not work to retrieve fault and pull up pin point troubleshoot so we are accurate

but lets start here if it just happened once and was glitch ,

did yiu check aktenatro for charging 15 volts, if not u need to

Master reset Procedure

1- Disconnect Battery Cables ( Negative & Positive Cables )you can use any electrical wire as an extension if battery cables don't reach .

2- Hold cables Together for 60 secs ,then let go

3- Wait 30 minutes

4- Make sure all doors are closed

5- Reconnect battery Cables

6- Lock & unlock the vehicles using the key from driver door side (if you have a key fob with no blade key, just lock & unlock using the key fob buttons)

7- Enter the vehicle and attempt to start

Please let me know

Thank You

Chad Farhat

ASE Certified Technician