How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Ford
Satisfied Customers: 48006
Experience:  16 years experience
2499435
Type Your Ford Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

I had my head gasket replaced and studs, with ARP kit and

Customer Question

I had my head gasket replaced and studs, with ARP kit and there after I had a # 6 cylinder drop and Cylinder #1 drop. I changed #6 and know it has populated codes- po265, po267, po273, po282. ( Injector A Circuit low) and it sputtering and has a hard start, I noticed the stand pipe was not attached to the other piece when removing it from the oil rail maybe this is the reason for my hard start? but not sure why I got the codes.
JA: Is this your first time dealing with this issue? What size is your engine?
Customer: first time dealing with this issue, my truck has 272,000 miles , my engine size is 6 6.0 liter
JA: What is the model/year of your Ford?
Customer: 2006 f350
JA: Are you fixing your F350 yourself? What have you tried so far?
Customer: yes
JA: Anything else you want the mechanic to know before I connect you?
Customer: I checked the ficm connectors and the fuel injector connectors and they seem to be connected properly.
Submitted: 4 months ago.
Category: Ford
Customer: replied 4 months ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Customer: replied 4 months ago.
Correction its code po264 not po265 the other codes are correct.
Customer: replied 4 months ago.
How long before anyone response by e-mail or tex if not phone??
Expert:  Chris (aka- Moose) replied 4 months ago.

Welcome, I'm Chris (aka Moose). I'm here to help 365 days a year, but not every hour of the day. I try to prevent delays as much as possible. Please understand I am not there and can only advise based on what you tell me. Let's get started.

Have you done the diagnostic steps for these codes yet?

If not do you need those steps?

Is the ICP pressure slow to build up above 500psi when it is hard to start?

Expert:  Chris (aka- Moose) replied 4 months ago.

Hello Chris here again,

I am checking in to make sure you got everything you expected from my answer. If not please reply so we can resolve your issue together.

Thanks Chris