How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Auto Service Technician
Category: Ford
Satisfied Customers: 27814
Experience:  Over 17 years diagnosing and repairing automobiles various makes and models with some training and certifications.
Type Your Ford Question Here...
Pete is online now
A new question is answered every 9 seconds

I have a 2010 ford focus and the mykey 80 mph restrictione

Customer Question

I have a 2010 ford focus and the mykey 80 mph restrictione is pn and i want to turn it off
JA: Is the car in "Park" or "Neutral?" Do you know if your car has a "wheel lock" feature?
Customer: Park no i don't know about the wheel lock feature
JA: Are you fixing your Focus yourself? What have you tried so far?
Customer: Yes reset and set up
JA: Anything else you want the mechanic to know before I connect you?
Customer: No
Submitted: 6 months ago.
Category: Ford
Expert:  Pete replied 6 months ago.

Hi my name is ***** ***** I will be happy to assist with this today.In some cases I may need more info to assist better.I apologize for any delay.

The only way I can see this done here with the Mykey system is with an administrator key going into the menu functions/settings in the cluster and then reset the keys.Here is some info on how to do this here.

Programming MyKey™ optional settings
Turn the ignition on using an admin key. To program the optional
settings, use the message center buttons to do the following:
1. Press SETUP until RESET FOR MYKEY SETTINGS is displayed.
2. Press and release the RESET button to display MyKey™ setup menus.
The first menu shown is:
3. If you don’t want to change the maximum speed setting, press the
SETUP button to display the next menu. The remaining menus appear as
follows with the default settings shown:

4. On any of the menus press RESET to highlight your choice with the
5. Press SETUP to enter your choice. The next optional setting will be
6. Repeat Steps 4 and 5 until you are done changing the optional
Disable MyKey™
To reset all MyKeys™ as admin keys do the following:
1. Turn the vehicle on using the admin key.
2. Press SETUP until PRESS RESET TO CLEAR MYKEY is displayed.
3. Press and release the RESET button. HOLD RESET TO CONFIRM
CLEAR is displayed.
4. Press and hold the RESET button for two seconds until ALL MYKEYS
CLEARED is displayed.

If more help is needed, use the reply tab to continue our conversation. If no further assistance is needed, kindly rate my service,your 5 star rating is appreciated.You can rate at any time and we can continue to work on your question as this will not close out your question.Keep in mind in some cases it can be difficult to fully diagnose or help repair your vehicle without seeing it and I work on delivering the best possible answer from what I see to work with.

Thanks Pete