How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask roy Your Own Question
roy
roy, import/domestic specialest
Category: Ford
Satisfied Customers: 5717
Experience:  ASE master tech for 40 years
3506196
Type Your Ford Question Here...
roy is online now
A new question is answered every 9 seconds

Just rebuilt motor 6.0 and will not start. sending code

Customer Question

just rebuilt motor 6.0 and will not start. sending code 2623. fuel is getting to the secondary filter with no air bubbles. very depressed
JA: Has the vehicle turned into a gas hog? And how does it start -- same as usual?
Customer: will not start don't know. cranks very smooth but will not start
JA: What is the model/year of your Chevy?
Customer: it is a ford f250 2005
JA: Are you fixing your F250 yourself? What have you tried so far?
Customer: yes. put in a new ficm and all new filters n pump
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 6 months ago.
Category: Ford
Expert:  roy replied 6 months ago.

hello, my name is ***** ***** I will be glad to assist you. please allow me a couple of minutes to gather some basic info.

Roy

Expert:  roy replied 6 months ago.

do you have a scan tool to see if you have high pressure oil pressure???

Roy

Customer: replied 6 months ago.
ok everything seems to be perfect just does not start. turns over really well wants to crank over but does not. help please with code p2623
Customer: replied 6 months ago.
hey you there
Customer: replied 6 months ago.
hey roy whats up buddy
Expert:  roy replied 6 months ago.

yes, I am here answering many questions.

once again, have you verified high pressure oil?? without 500 and above, it will not start

let me check on the code

Roy

Expert:  roy replied 6 months ago.

ok, the code indicates a circuit issue with the ipr. I attached an explanation and how to check the ipr itself. if it ohms out good, then you have a wiring harness issue

Roy

Expert:  roy replied 6 months ago.

are you there

Expert:  roy replied 6 months ago.

do you need any more help???

Roy

Roy

Expert:  roy replied 6 months ago.

Roy