How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23821
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

08 6.4 exhaust back pressure sensor harness has black, and

Customer Question

08 6.4 exhaust back pressure sensor harness has black, green and green w/stripe. New pigtail harness has blue,gray and purple what goes where
Submitted: 6 months ago.
Category: Ford
Expert:  david craig replied 6 months ago.

Hi Im David, thanks for visiting the site. you need to see how the old connector is wired by looking at the print, orient the new connector the same way and splice it accordingly. its only going to go on the sensor one way.