How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan, ASE Certified Technician
Category: Ford
Satisfied Customers: 1695
Experience:  Auto Technician
Type Your Ford Question Here...
Dan is online now
A new question is answered every 9 seconds

Having intermittent stalling problems found these error

Customer Question

having intermittent stalling problems found these error codes p0476, p1280, p1670
JA: Do you have a scan tool to read the codes?
Customer: yes snapon
JA: What is the model/year of your Ford?
Customer: 2000 f250 super duty
JA: Are you fixing your F-250 Super Duty yourself? What have you tried so far?
Customer: yes replaced cam sensor
JA: Anything else you want the mechanic to know before I connect you?
Customer: yes what direction should i go in and what do those codes mean
Submitted: 10 months ago.
Category: Ford
Expert:  Dan replied 10 months ago.

Hello my name is***** am an ASE Master Technician and I am glad to help you with your question.

Expert:  Dan replied 10 months ago.

I can send you the repair steps from the factory service manual to diagnose these codes and what they mean if you would like.

Expert:  Dan replied 10 months ago.

You need to replace your fuel filter, and exhaust back pressure sensor. The p1280 is an injector pressure sensor code that could be caused by a clogged fuel filter, or you could also need to replace the injector control pressure sensor.

Verify DTC P1316 &/Or DTC P1670
Clear DTCs. Turn ignition key off and on, then start engine. Road test vehicle. Perform KOEO ON-DEMAND SELF-TEST . Retrieve DTCs. If DTC P1316 and/or DTC P1670 is present in continuous memory with any KOEO DTCs, perform appropriate system test and repair as necessary

Expert:  Dan replied 10 months ago.

Hello again Dan here,

I am contacting you because the post has not been closed or rated.

This question is coming up on 7 days which means it will time out and close.

You have already paid to get this question answered, but you have not rated.

Let me help some more. Is there anything else I can help you with?

If I did not give you 5 star service, please let me know what I missed.