How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Ford
Satisfied Customers: 48717
Experience:  16 years experience
Type Your Ford Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

It wont crank. Showing codes p2291 and u0073. Full tank.

Customer Question

It wont crank. Showing codes p2291 and u0073.
JA: Have you checked the fuel supply? And are all the spark plugs working?
Customer: Full tank. Just filled up with fuel. There are no spark plugs in a diesel maam
JA: What is the model/year of your Ford?
Customer: 2008 F350
JA: Are you fixing your F350 yourself? What have you tried so far?
Customer: I have tried nothing but turning the key
JA: Anything else you want the mechanic to know before I connect you?
Customer: no maam
Submitted: 11 months ago.
Category: Ford
Expert:  david craig replied 11 months ago.

Hi Im David, thanks for visiting the site, P2291 FORD - Injector Control Pressure Too Low - Engine Cranking

U0073 FORD - Control Module Communication Bus OFF Possible causes - Faulty CAN communication system - CAN System harness is open or shorted - CAN System circuit poor electrical connection

allow me a few moments to find possible solutions. thanks

Expert:  david craig replied 11 months ago.

so its not even cranking? if not, then when you try to start it does the security light go out?

Expert:  david craig replied 11 months ago.

there is a recall on the vehicle. so contact ford and have them schedule you in to have the recall complied with

Expert:  david craig replied 11 months ago.

were you able to schedule the vehicle for the recall?

Expert:  david craig replied 11 months ago.

do you still need assistance?

Expert:  Chris (aka- Moose) replied 11 months ago.

Welcome, I'm Chris (aka Moose), my normal schedule online is around lunch and after dinner till early morning.

Do you still need help diagnosing the CAN communication issue you are having that is preventing module to module communication?

Please read this:

  1. Understand it's not one answer and done. We can communicate back and forth many times.
  2. I do not work at or for Just Answer. You and I can only communicate on this page.
  3. When you're pleased or happy with my answer or efforts to help you. At the top of the screen please rate me or reply and say ( I'm pleased.)
  4. When I help you I am only paid from your question value deposit when you rate me on this screen. Rating does not close the post and you're more than welcome to follow up.

Thanks for using Just Answer, Chris