Ford

Have Ford questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Ford Questions
My 04 focus 2.0 sohc has a failed timing belt tensioner.
my 04 focus 2.0 sohc has a failed timing belt tensioner. When I get #1 to read tdc at crankshaft the camshaft mark is off about 75 degrees. Can I simply put cam gear to where marks align?… read more
Chris (aka- Moose)
Chris (aka- Moose)
Ford Technician
Vocational, Technical or Trade School
34,605 satisfied customers
Vin # 1FTYR10V1YPA32579 Procedure for replacing the cam
Vin # 1FTYR10V1YPA32579 Procedure for replacing the cam synchronizer and sensor? Also how to get the number 1 spark plug to TDC?… read more
Chris (aka- Moose)
Chris (aka- Moose)
Ford Technician
Vocational, Technical or Trade School
34,605 satisfied customers
What kind of transmission does '96 Ford taurus automatic
What kind of transmission does '96 Ford taurus automatic transmission 3.0 liter ohv Vulcan engine have? If a car with these specs came with both kinds of auto transmission that model year, where shoul… read more
Eric
Eric
Retired
N/A
45,844 satisfied customers
I have a 1995 Ford Taurus with a 3.0 Vulcan engine with a
I have a 1995 Ford Taurus with a 3.0 Vulcan engine with a distributor. It has 145,000 miles, the oil and filters were changed regularly. What would cause the cam shaft to break ?… read more
Jaybird61
Jaybird61
Master Automotive Mechanic
3,401 satisfied customers
1994 ranger 4.0L vin x i rebuilt motor matched cam and crank
1994 ranger 4.0L vin x i rebuilt motor matched cam and crank gears at top dead center no. 1 cyl. but the crankshaft marks at top dead center don't line up with the no. 1 piston at top dead center?… read more
Jerry
Jerry
Service consultant
Vocational, Technical or Trade Scho
13,108 satisfied customers
ford ranger: Moose I've just rebuilt a 2005 ford ranger 3.0,
Moose I've just rebuilt a 2005 ford ranger 3.0, I have the cam sync tool, does the crank sensor point to the gap in the harmonic balancer "teeth" when its at #1 TDC or 180 out?… read more
A. Penland
A. Penland
Ford Senior Master Technician
Vocational, Technical or Trade School
8,710 satisfied customers
ford escape xlt: Hello, I have a 2002 Ford Escape 3.0 DOHC,
Hello, I have a 2002 Ford Escape 3.0 DOHC, I just rebuilt the engine and I need clear directions on how to set the timing. Then engine is still on the stand. I followed these directions word for word … read more
SuperDave
SuperDave
auto technician
101 college hrs
1,481 satisfied customers
Ford: i have an 02 windstar and am trying to set the timing
i have an 02 windstar and am trying to set the timing . I found the mark on the timing chain cover. Is the cut -a -way on the crankshaft pulley the other mark?… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
27,281 satisfied customers
1995 ford taurus: with 3.0 v6..cylinder..no.1 plug wire..rotor was at
i have a 1995 ford taurus with 3.0 v6. had to do a head job. son took it apart without marking distributor and has turned motor. i put the motor on top dead center no.1 cylinder and put the distributo… read more
JacobTD
JacobTD
Diagnose Specialist
Master
1,137 satisfied customers
2005 Ford Taurus: vulcan..turning key to start position..engage..relay
I have a 2005 Ford Taurus with the Vulcan 3.0 V6 engine. When turning key to start position, the starter does not turn or engage. Power to all internal systems breaks as normal and I can hear a relay … read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
24,999 satisfied customers
2003 taurus: cam..cylinder..rough idle and stumble on acceleration
cant find tdc mark on crank pulley on 2003 taurus 3.0 ohv,am installing new cam syncro sensor. tried to go into #1 cylinder to get tdc but still have rough idle and stumble on acceleration… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
27,281 satisfied customers
1996 Ford Taurus: faulty..I mechanic replaced my engine..oil pressure
I have a 1996 Ford Taurus 3.0 vulcan engine. I am suspecting a faulty cam position sensor problem. I mechanic replaced my engine when it suddenly lost oil pressure the 1st time. It has lost oil pressu… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
27,281 satisfied customers
i have 02 escape 3.0 dohc engine can someone tell me the correct
i have 02 escape 3.0 dohc engine can someone tell me the correct way to check timing on engine? timing marks and cam position… read more
someguy_78
someguy_78
Service Tech
Associate Degree
292 satisfied customers
99 taurus: with the 3.0 vulcan engine..blew..engines rebuild..blown
I have a 99 taurus with the 3.0 vulcan engine. It blew a head gasket at 116,000 miles. Grooms engines rebuild the engine and now at 186,000 or 70,000 miles the head gasket is blown again. Is there a f… read more
DR.AL
DR.AL
19 satisfied customers
97 Town Car Cartier: vin..timing marks on the crank chain gears
97 Town Car Cartier 4.6L VIN W SOHC 2v - Engine rebuild - Cam timing How to set cam timing and install timing chains? Chilton manual not clear. It says to match the timing marks on the crank chain gea… read more
Tim West
Tim West
Service Manager
Computer/ Automotive certifications
16 satisfied customers
2002 taurus: no dtc, looking at cam sensor, vacuum sensor..maf cleaned
2002 taurus wagon 35K miles, 3.0 vulcan engine, has a recurring engine stumble miss at idle and steady load, accelerates fine, starts fine, good milage. stumble is cyclic ( ~8 times per minute) and so… read more
Dennis
Dennis
Senior Master A Technician/Shop Foreman
Vocational, Technical or Trade Scho
758 satisfied customers
1997 Taurus: runs great..neutral..a stoplight and rpms..accelerate
I have a 1997 Taurus, 3.0 vulcan, 90k miles, runs great but the transmission has recently started slipping into neutral from drive when stopped at a stoplight and rpm's are low. It either goes back in… read more
Richard
Richard
ASE Certified Technician
Vocational, Technical or Trade Scho
1,558 satisfied customers
1996 ford taurus: crankshaft..camshaft sensor located
Do my 1996 ford taurus have two positioner sensors ( crankshaft, camshaft sensors) if so, where is the camshaft sensor located?… read more
stefano
stefano
Auto Technician
Vocational, Technical or Trade Scho
236 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

27,281 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Ford Technician

34,605 satisfied customers

24 years of experience diagnosing & repairing

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

12 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

2,651 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,558 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x