How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Ford
Satisfied Customers: 22690
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
9825021
Type Your Ford Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

I have a Ford Fusion 2007, yes, and when scanner it the

Customer Question

Hi! I have a Ford Fusion 2007
JA: Are you fixing your Fusion yourself? What have you tried so far?
Customer: yes, and when scanner it the follow codes apear misfired cylinder 1, misfires cylinder 2 misfired cylinder 3
JA: Have you seen the misfire code before? Has the car been stalling?
Customer: and sensor camshaft/cranck no signal
JA: What is the make/model of your car?
Customer: 2007 SEL v6 3.0
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 8 months ago.
Category: Ford
Expert:  david craig replied 8 months ago.

Hi Im David is the vehicle starting?

Expert:  david craig replied 8 months ago.

hello??????????

Expert:  david craig replied 8 months ago.

do you still need assistance???

Expert:  sprinkles08 replied 8 months ago.

Hello and welcome to JustAnswer!

There are several things that will cause misfire codes. You may have a single issue causing all the codes to set or there may be a combination of problems causing the individual cylinders to miss.

If you're setting a cam or crank sensor code and that started at the same time as the misfire codes then you'll want to diagnose that issue first. A crank signal issue can cause real or erroneous misfire codes to set. Other than the misfire codes what P codes are setting?