How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask john -aka eauto Your Own Question
john -aka eauto
john -aka eauto, The Car Guy
Category: Ford
Satisfied Customers: 16039
Experience:  ase tech over 15 years in the field
6149662
Type Your Ford Question Here...
john -aka eauto is online now
A new question is answered every 9 seconds

Can you tell me if there is a fuse our relay for the

Customer Question

can you tell me if there is a fuse our relay for the overdrive on a 98 Taurus dohc. you start the car and put it in drive and it jurks. the o/d light is flashing . I pushed the o/d button but I don't get anything.thank you
Submitted: 10 months ago.
Category: Ford
Expert:  john -aka eauto replied 10 months ago.

any tranny codes?

Customer: replied 10 months ago.
I had one code a p1744 the tcc solenoid I replaced the part and had none after that.
Expert:  john -aka eauto replied 10 months ago.

Have you checked since the OD light has been flashing?

Customer: replied 10 months ago.
the o/d light is still flashing. I also replaced the natural safety switch and now the code po708 comes up. could I have a bad shift solenoid.
Customer: replied 10 months ago.
I have not heard back from you unless you did not get my last reply . yes the o/d light is still flashing. I also replaced the natural safety switch and now a code po708 comes up . could I have a bad shift solenoid as well.
Expert:  john -aka eauto replied 10 months ago.

im sorry i just got home give me a few minutes while i gather info

Expert:  john -aka eauto replied 10 months ago.

the po708 refers to the transmission range senor or circuit...I would start by changing the range sensor

Customer: replied 10 months ago.
i don't think my transmission is in natural I think that's I get the code po708 can you tell me how many dents . I mean do you move the lever clockwise or counter clockwise.
Expert:  john -aka eauto replied 10 months ago.

to remove?