How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall C Your Own Question
Randall C
Randall C, ASE MasterTechnician
Category: Ford
Satisfied Customers: 12803
Experience:  35 years ASE Master Tech, Diagnostic , Electrical Specialist
13677702
Type Your Ford Question Here...
Randall C is online now
A new question is answered every 9 seconds

What are the steps I need to do to replace the parking brake

Customer Question

What are the steps I need to do to replace the parking brake pads on a 2003 f250 super duty
Submitted: 11 months ago.
Category: Ford
Expert:  Randall C replied 11 months ago.

Hello, It is not too difficult of a job, Matter of following some steps and,, I would recommend the special tool to remove the 2 hold down springs. You cna get this tool and most any parts store, It lays on top of the spring, push in and turn to release the holddown spring. The tool just makes it easier than using a pair of pliers. I have attached a file as well as link to a picture of the tool I mention,

Please leave rating for my service provided today, After the required rating? you can do a followup on this smae post if need. Thanks