How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan, ASE Certified Technician
Category: Ford
Satisfied Customers: 1687
Experience:  Auto Technician
Type Your Ford Question Here...
Dan is online now
A new question is answered every 9 seconds

I have 2014 edge and need to reenergize the tailgate lift.

Customer Question

I have 2014 edge and need to reenergize the tailgate lift.
JA: What is the model of your '14 Ford?
Customer: Edge
JA: Are you fixing your vehicle yourself? What have you tried so far?
Customer: Yes. Myself. Checked fuses. Seems like aim supposed to pull certain fuses, for like 20 seconds
JA: Most vehicles have two fuse panels. Have you located both?
Customer: Yes
JA: Anything else you want the mechanic to know before I connect you?
Customer: Back windshield had been replaced
Submitted: 11 months ago.
Category: Ford
Expert:  Dan replied 11 months ago.

Hello my name is***** am an ASE Master Technician and I am glad to help you out with your question.

Expert:  Dan replied 11 months ago.

Power Liftgate Initialization

NOTE: The power liftgate may not operate correctly under the following conditions:

  • A low voltage or dead battery
  • A disconnected battery
  • Repairs/adjustments have been made to the power liftgate rod, power liftgate motor, liftgate hinges or liftgate striker

If any of these conditions has occurred, the power liftgate must be reinitialized.

  1. NOTE: Battery power must be removed from the Liftgate/Trunk Module (LTM) for 20 seconds before the LTM will enter the initialization mode.

    Disconnect the battery or remove the LTM fuse(s).

  2. Wait 20 seconds and reconnect the battery or reinstall the LTM fuse(s).
  3. If liftgate is not already in the fully closed position, manually close and fully latch the power liftgate.
  4. NOTE: Make sure the power liftgate system is turned ON in the message center before performing this step.

    NOTE: If the power liftgate does not open during this step, refer to the SYMPTOM CHART to diagnose the inoperative power liftgate.

    Power open the power liftgate by using the key fob or control switch.

  5. Once the power liftgate is fully open, close the power liftgate by using the key fob or control switch.
Expert:  Dan replied 11 months ago.

Please reply to this if you need more help and we can continue this conversation. If you are satisfied with my service, please rate at the top of the screen. Rating does not close out your question. Remember, sometimes it is difficult to completely diagnose your vehicle without being there, but I will try to give you the best answer I can. If I am not giving you 5 star service, please let me know what I missed.



Expert:  Dan replied 11 months ago.

Hello again Dan here,

I am contacting you because the post has not been closed or rated.

This question is coming up on 7 days which means it will time out and close.

You have already paid to get this question answered, but you have not rated.

Let me help some more. Is there anything else I can help you with?

If I did not give you 5 star service, please let me know what I missed.

I do not get compensated for my time and resources unless you rate me.