How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23821
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

Im colin, i have an issue that has stumped me. Im no

Customer Question

Hello, im colin, i have an issue that has stumped me. Im no stranger to fords 4x4 and complete drive train, trans, transfer, joints, bearings, ect. Doors, even replaced interior. My question is this. My brake lights, hazards, wiper, turn have not been working. The connector to switch was all f**ked. I have tilt steering. Connector clips were broken. Got a new connector from a 2000 expedition at a junk yard. I did a continuity test on the switch. Checked fuses. Replaced wiring acording to a online picture. Nothing but low and high beams. I have taken apart switch and cleaned all copper corrosion. Taken pictures before to assemble correctly.
Submitted: 1 year ago.
Category: Ford
Customer: replied 1 year ago.
Checked 5 amp fuse, okay
Expert:  Ron replied 1 year ago.

Hello and thank you for your question,

So you still trying to get the turn signal working?