How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask SuperDave Your Own Question
SuperDave, ASE Certified Technician
Category: Ford
Satisfied Customers: 1491
Experience:  over 16 years experience
Type Your Ford Question Here...
SuperDave is online now
A new question is answered every 9 seconds

Looking to remove the black cover so that I can get to the

Customer Question

looking for how to remove the black cover so that I can get to the turn signal relay
JA: Have you checked the fuse? Have you checked for bad bulbs?
Customer: 2000
ford ranger xlt
JA: Tell me a bit more about what's going on so he can help you best.
Customer: I am hard of hearing and I want to make the noise louder with a louder relay
JA: Are you hoping to fix this yourself?
Customer: or beeper
JA: Is there anything else the Ford Mechanic should be aware of about your Ford?
Customer: yes
JA: What else should I tell the Ford Mechanic?
Customer: what relay should I use to make it louder
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Ford Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Ford
Customer: replied 1 year ago.
The sound it makes right now is standard and works well. But it is a noisy truck, and I'm getting older and don't hear as good as I did when I was younger. I'm trying to see what I can do to make the noise of the blinker louder so that I don't drive down the highway with my blinker on by accident.
Expert:  SuperDave replied 1 year ago.

The easiest way is to install a universal turn signal alarm.Click HERE for more info.

Customer: replied 1 year ago.
Thank you. I was planning on that. But how do you remove the black cover to get to the relay is the question.
Expert:  SuperDave replied 1 year ago.

There are some plastic tabs on the cover that you need to push in to remove the cover.

Customer: replied 1 year ago.
No thanks, ***** ***** I have it.
Expert:  SuperDave replied 1 year ago.