How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim Mohr Your Own Question
Tim Mohr
Tim Mohr, ASE MASTER TECH
Category: Ford
Satisfied Customers: 15708
Experience:  30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL
17454363
Type Your Ford Question Here...
Tim Mohr is online now
A new question is answered every 9 seconds

How to locate and replace a crankshaft position sensor 2008

Customer Question

How to locate and replace a crankshaft position sensor for a 2008 f250 6.4 diesel super duty
Submitted: 1 year ago.
Category: Ford
Expert:  Tim Mohr replied 1 year ago.

Hi, my name is ***** ***** are very easy to replace, the sensor is located on the block, driverside toward the front, you just disconnect the e,ectrical connector then remove the 1 bolt hoding the sensor into the block, and it pull straight out, below is a picture of the sensor and its location,Tim

Customer: replied 1 year ago.
Is that the camshaft sensor
Expert:  Tim Mohr replied 1 year ago.

Yes, it is.

Customer: replied 1 year ago.
I need the crankshaft positioning sensor
Expert:  Tim Mohr replied 1 year ago.

I apologize, I missunderstood, the crankshaf sensor is on the passenger side block,toward the front, you will need to remove the steering dampner shock first, then remove the connector at the cranksensor and the bolt hoding it in, below is a picture with the sensor and location,Tim

Expert:  Tim Mohr replied 1 year ago.

are you still here?

Expert:  Tim Mohr replied 1 year ago.

Please dont forget to rate me, so I can get credit for helping,Thanks,Tim

Customer: replied 1 year ago.
Customer: replied 1 year ago.
Charging my phone sorry
Expert:  Tim Mohr replied 1 year ago.

will you rate me??

Expert:  Tim Mohr replied 1 year ago.

I dont know why you wont rate me, I dont get paid unless you do, I provide the info you were looking for?

Expert:  Tim Mohr replied 1 year ago.

ok, I see you have read all my responses, and I assume you are just looking for a free answer, good luck in the future,Tim