How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23821
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

I have a 08 F250 dual temp controls no heat or vents on

Customer Question

I have a 08 F250 dual temp controls no heat or vents on drivers side . I suspect its a Blend Door actuator motor, I dont know withch one?
JA: Tell me a bit more about what's going on so he can help you best.
Customer: I have no heat or vents operating on drivers side ,defrost mid,floor notworking
JA: Are you hoping to fix this yourself?
Customer: Well what I see on forums It's a Bear, I think I see one actuator under Radio,don't know what that controls?
JA: Is there anything else important you think the Ford Mechanic should know about your Ford?
Customer: I tried to find air duct diagram to see how many blend doors there are and what controls drivers side
JA: Our top Ford Mechanic is ready to take your case. Just pay the $5 fully refundable deposit and I'll fill the Ford Mechanic in on everything we've discussed. You can go back and forth with the Ford Mechanic until you're 100% satisfied. We guarantee it.
Submitted: 1 year ago.
Category: Ford
Expert:  Scott W. replied 1 year ago.

Hello my name is ***** ***** the passenger side work ok?, Does the air blow in the correct positions, but just no heat or cooling?