How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23821
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

Starts up fine runs good engine light on coding 2290,

Customer Question

starts up fine runs good engine light on coding 2290
JA: Tell me a bit more about what's going on so he can help you best.
Customer: injectors sound little noisy or excellerate
JA: Are you hoping to fix this yourself?
Customer: yes mechanic
JA: Great! What have you tried so far?
Customer: i ordered icp sensor first have any ideals
JA: Is there anything else the Ford Mechanic should be aware of about your Ford?
Customer: it has a little over 200000 miles its a great truck if i have to i will put new eng trans in it before i wont spend 50000 for a newer one thats crazy
JA: I'm sending you to a secure page on JustAnswer so you can place the $5 fully refundable deposit now. While you're filling out that form, I'll tell the Ford Mechanic about your situation and connect you two.
Submitted: 1 year ago.
Category: Ford
Expert:  Chris (aka- Moose) replied 1 year ago.

Welcome, I'm Chris (aka Moose). Experts aren't employees / agents of Just Answer. We are independent service providers using the Site to sell their Expert knowledge to Customers. I strive to provide EXCELLENT 5 STAR service, let me know what's needed from me so your pleased.

  1. Can i get the year make, model, and engine?
Customer: replied 1 year ago.
2003 ford 6.0
Expert:  Chris (aka- Moose) replied 1 year ago.

Thanks, ***** ***** scan tool show actual and desired ICP pressure while driving? If so are they about identical at idle and all rpm ranges?

While monitoring ICP if you move its wiring or connector, do you ever get a change in the reading?