How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Ford
Satisfied Customers: 48356
Experience:  16 years experience
Type Your Ford Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

I have 2010 f150 with nav. that I replaced left side blend

Customer Question

I have 2010 f150 with nav. that I replaced left side blend motor. was blowing cold know stuck on hot is there a calibration I need to do
JA: Thanks. Can you give me any more details about your issue?
Customer: Truck was changing temp on driver side. I replaced blend motor know just its stuck on hot with no change when going up or down on controls
JA: OK got it. Last thing — Ford Mechanics generally expect a deposit of about $28 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 1 year ago.
Category: Ford
Expert:  Chris (aka- Moose) replied 1 year ago.

Welcome, I'm Chris (aka Moose). Experts aren't employees / agents of Just Answer. We are independent service providers using the Site to sell their Expert knowledge to Customers. I strive to provide EXCELLENT 5 STAR service, let me know what's needed from me so your pleased.

To calibrate the HVAC. Remove the battery cables, hold them together for one minute, then 15 minutes later, reconnect them. Turn the key on for 30 seconds or more, then start the vehicle and test the operation of the HVAC system.

Thanks for asking your question and letting me try to help you.

If your confused on why or how to rate me, let me know.

I'm only paid from the deposit you've made when you rate 3,4, or 5 stars.

Follow up/Reply as many times as needed before or after rating.

Customer: replied 1 year ago.
I removed the cables and held them together. waited awhile after turning the key on and the driver side still doesn't work I put a new blend door motor in it from the dealer. Before i started working on the truck only had a/c now its stuck on heat. The blend door turns back and forth I took apart the old motor and was turning it by hand it was changing from heat to cold while turning it.
Expert:  Chris (aka- Moose) replied 1 year ago.

Thanks, ***** ***** not a calibration issue or door or actuator issue. Its now likely to be the climate control to blame. Would you like the diag steps?

Customer: replied 1 year ago.
Expert:  Chris (aka- Moose) replied 1 year ago.

See the steps in the link below.

Expert:  Chris (aka- Moose) replied 1 year ago.

Hello again Chris here,

1) When customers come to Just Answer the website and the experts want them to have a great 5 star experience.

2) We also want them to be so pleased that they come back for future needs.

3) I have the feeling you were not pleased with my help and or need me to help more. If so please do reply.

4) I have an option to upload diagrams, repair guides, find a repair facility, or call you if that would help.

Thanks Chris