Ford

Have Ford questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Ford Questions
I've replaced everything within the brake system except for
I've replaced everything within the brake system except for the lines but there is no leaking and I have bleed the brakes and master over and over agen and the brakes work good the tires will lock up … read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
8,021 satisfied customers
Ron. I have a 2002 FordFocus .One of the brake linesbroke. I
Hi Ron. I have a 2002 FordFocus .One of the brake linesbroke. I replaced both brake lines in the front . i bled all four calipers but the brakes lose preasure when I start the car. I was told I can bl… read more
HDGENE
HDGENE
6,601 satisfied customers
Ford F-350: I have a 1990 Ford F-350 with 7.5 liter engine,
I have a 1990 Ford F-350 with 7.5 liter engine, dual rear wheels and 2WD. I have replaced both front calipers, rotors and pads, rear shoes and wheel cylinders, master cylinder, vacuum booster and prop… read more
HDGENE
HDGENE
6,601 satisfied customers
ford f-150: Why are my rear brakes on my 1987 f150 locking
Why are my rear brakes on my 1987 f150 locking up. Have changed all rubber lines brake shoes, master cylinder, wheel cylinders and abs hydraulic valve and blead several tim… read more
Lou P. master tech
Lou P. master tech
Mercedes Benz master tech
Bachelor's Degree
6,324 satisfied customers
F-350: Brakes F-350 dually Backing plate cracked, ordered
Brakes F-350 dually Backing plate cracked, ordered one from ford, took a week till I could install. Rebuilt the wheel cylinders on the rear both sides. Bleed the system, and adjusted the shoes. While … read more
James
James
Bachelors degree automotive technology with minor in diesel
3,578 satisfied customers
expedition: I have a 97 Ford Expedition and I have just replaced
I have a 97 Ford Expedition and I have just replaced the master cylinder, new rotors, ceramic pads and new calipers. The brake stiffens up when the vehicle is not running but when running after hours … read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
29,223 satisfied customers
ok, just replaced brake booster, master cyl..put new..abs system...any
ok, just replaced brake booster, master cyl. for the third time put new rubber brake lines front and rear by passed rear abs system and bled several times bench bled master cyl. each time before insta… read more
SuperBob
SuperBob
Ford dealer senior master technician
Vocational, Technical or Trade Scho
2,603 satisfied customers
2001 ford: v8 cruisecontrol 4.6L brake pedal..master cylinder..wheels
2001 ford van 150 enconoline v8 cruisecontrol 4.6L brake pedal almost to the floor then vehicle stop, replace brake booster and master cylinder still the same, also bled all wheels still the same.… read more
Virtual Wrench
Virtual Wrench
Owner of LJ Auto Repair 37 years
Associate Degree
14,398 satisfied customers
96 Ford Bronco: Replaced master cylinder..bled..four wheels
96 Ford Bronco with RWAL brakes. After replacing leaking brake line and bleeding brakes pedal travel was excessive and with fair amount of pressure could bring the pedal to the floor. Replaced master … read more
Cardoctor71
Cardoctor71
Retired Master Certified Technician
High school graduate
669 satisfied customers
1994 ford: 350 diesel dually..sinking pedal..brakes adjusted.system
I have a 1994 ford 350 diesel dually. My problem is a sinking pedal when motor is running. i took it to a shop and had a new master cylinder put on (bench bled) complete system presser bled all brakes… read more
Pavlin Koev
Pavlin Koev
Diagnostic Technician
High School or GED
1,069 satisfied customers
93 Ford F-350: busted..a brake line..brake pedal..replaced everything
93 Ford F-350 Brake problem busted a brake line in the front After repairing it couldn't get a good brake pedal after start up it would go straight to the floor fine with the engine off I have replace… read more
Tim Mohr
Tim Mohr
SHOP OWNER
Master's Degree
16,167 satisfied customers
2000 Ford Taurus: master cylinder..the brakes went all the way..pumped
We had the master cylinder on our 2000 Ford Taurus replaced about three weeks ago. Today while my daughter was trying to stop at a red light the brakes went all the way to the floor, she pumped them a… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
25,022 satisfied customers
1994 ford f150: the brakes all the way..2wd..abs..diff
just changed the brakes all the way around on my 1994 ford f150 2wd no abs, i can not get any peddal pressure ive bleed the brakes in the propper order and the pressure diff. switch… read more
RJ
RJ
Ford Tech
High School or GED
1,573 satisfied customers
1998 ford windstar: van..brakes go to floor..resistance..no leaks.
1998 ford winstar van. brakes go to floor with moderate resistance. no leaks. replaced master cylinder and bleed brakes until blue in the face. brakes will not pump up as when air in lines. whats next… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
29,223 satisfied customers
1996 Ford f-350: with diesel..pads..Bled brake system 2 man.
Have 1996 Ford f-350 with diesel. Replaced rear shoes front Calipers and pads. Bled brake system 2 man. "soft" pedal. checked vacuum system, and appears to be fine. Replaced Master cylinder after benc… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
25,022 satisfied customers
ford windstar: master two times bled brakes ajusted back drums
have a1998 for winstar brakes got to floor have changed master two times bled brakes ajusted back drums but still goes to the floor any help please… read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
10,834 satisfied customers
93 sable: wagon..the brakes go to the floor..pumping
my 93 sable wagon the brakes go to the floor and then after pumping they come back only to do it again… read more
Virtual Wrench
Virtual Wrench
Owner of LJ Auto Repair 37 years
Associate Degree
14,398 satisfied customers
2000 taurus: can not maintain peddle pressure..rear brakes..cylinders
we are having problems bleedig the brakes on a 2000 taurus. can not maintain peddle pressure. Changed rear brakes and cylinders. Is there anything special that needs to be done while bleeding the brak… read more
RIP
RIP
Lead Technician
Vocational, Technical or Trade School
469 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

25,022 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

29,223 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,591 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,524 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x