Ford

Have Ford questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

2005 Ford ranger 4.0 auto starts fine then when rev up to…

Customer Question
2005 Ford ranger 4.0 auto...
2005 Ford ranger 4.0 auto starts fine then when rev up to 3000 it revs up and down by itself
Submitted: 2 years ago.Category: Ford
Show More
Show Less
Ask Your Own Ford Question
Answered in 3 minutes by:
1/21/2016
Ford Mechanic: EricFromCT, Ford Technician replied 2 years ago
EricFromCT
EricFromCT, Ford Technician
Category: Ford
Satisfied Customers: 4,779
Experience: 20 years dealership exp., ASE A1-A9 L1 L2, Ford Lincoln Mercury Senior Master, Diesel Certified
Verified

Hi. Do you mean when the vehicle is in neutral or park?

Ask Your Own Ford Question
Customer reply replied 2 years ago
Park it started running rough on way home then ran OK as long as I kept rpm up. Started it this morning but it hits 3000 rpm and revs up and down in park. Kind of misses.
Customer reply replied 2 years ago
Just hit 160k miles.
Customer reply replied 2 years ago
Also now fog lights acting funny. Going on and off
Customer reply replied 2 years ago
Also the check engine light came on and then started flashing
Ford Mechanic: Chris (aka- Moose), Technician replied 2 years ago
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Ford
Satisfied Customers: 53,348
Experience: 16 years experience
Verified

Welcome, I'm Chris (aka Moose). All experts are independent contractors here at Just Answer none are employees, we do not get a paycheck or benefits from JA. We work for the customers. I strive to provide EXCELLENT 5 STAR service, let me know what's needed from me so your pleased.

The expert which was helping has opted out. Would you like me to help?

Ask Your Own Ford Question
Customer reply replied 2 years ago
The answers you are texting I am not able to receive on my not smart phone... Please send to email
Customer reply replied 2 years ago
Never mind please revers all charges. Disconnecting the battery worked. Thanks
Ford Mechanic: Chris (aka- Moose), Technician replied 2 years ago

Glad you got it resolved.

Ask Your Own Ford Question
Customer reply replied 2 years ago
You charged my card after I told you not to. Please reverse all charges imeadiatly. If not I will contact bank tomorrow. I received nothing of use from you!
Ford Mechanic: Chris (aka- Moose), Technician replied 2 years ago

I am not associated with Just Answer nor employed by them. I just answer questions here. You would have to take up your account and payment issues with them.

Ask Your Own Ford Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a ford mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Ron Your Own Question
Ron
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 25,022
25,022 Satisfied Customers
Experience: 23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Ron is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

AlvinC answered a question about my Ford truck that only someone with an in-depth knowledge of his subject would have known what was going on.

Rich DUSA

Because of your expertise, you armed me with enough ammunition to win the battle with the dealer. They are installing a fuel filter and fuel pump at no charge to me.

MollyUSA

I needed help with my car on Saturday morning....got a response in 5 minutes, and it was the perfect solution. Thanks again to your service.

Jason V.Kirkland, WA

I do know, after going though this with JustAnswer, that I can somewhat trust my mechanic but I will always contact you prior to going there.

BRNew Jersey

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

< Previous | Next >

Meet the Experts:

Ron

Ron

ASE Certified Technician

25,022 satisfied customers

23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs

Chris (aka- Moose)

Chris (aka- Moose)

Technician

53,348 satisfied customers

16 years experience

John Mc

John Mc

Ford Technician

5,495 satisfied customers

19 years Ford Lincoln Mercury experience

Chuck

Chuck

ASE Certified Technician

1,685 satisfied customers

33 Years Experience,Ford Senior Master,ASE Master,L1 Advanced Engine Performance

Cam

Cam

Journeyman Automotive Technician

10 satisfied customers

GM Grand Master Technician 2007. 14 years Automotive experience.

Mike V.

Mike V.

Auto Service Technician

1,591 satisfied customers

25 years experience on all makes and models, Licensed NYS Inspector.

Richard

Richard

ASE Certified Technician

1,524 satisfied customers

12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.

< Previous | Next >

Related Ford Questions
Ford: , my 2011 ford ranger sounds like it has a knock.
hi, my 2011 ford ranger sounds like it has a knock. sitting still I rev up engine to 3000 rpm and the engine shakes.… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
53,348 satisfied customers
ranger: I have a 2006 ford ranger with the 4.0 l engine. Ive
I have a 2006 ford ranger with the 4.0 l engine. I've changed the fuel and air filters. The engine runs smooth to 3000 rpm and starts missing and won't go past 3500 rpm. Got any ideas????… read more
JacobTD
JacobTD
Diagnose Specialist
Master
46 satisfied customers
My Truck runs very rough when I first start it in the morning
My Truck runs very rough when I first start it in the morning for about 10 seconds and then runs fine all day long. I have a 2000 ford ranger 4.0 V-6 auto trans… read more
rpmdiag
rpmdiag
High school
7,865 satisfied customers
2003 ford ranger: check engine light came on..stalls..rev
I have a 2003 ford ranger, took it to auto zone because check engine light came on. cameup with codes saying mass air flow sensor or o2 sensors, replaced maf and 2 forward o2 sensors ,truck still idle… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
25,022 satisfied customers
1994 Ford Ranger: wheel drive..all the gears....highway speeds
I have a 1994 Ford Ranger 4.0 automatic transmissionXXXXX the truck runs fine but will not shift into overdrive. Shifts fine through all the gears....highway speeds are fine but it just wont shift int… read more
freddie at 23
freddie at 23
AUTOMOTIVE TECHNICIAN
Associate Degree
68 satisfied customers
1994 Ford Ranger: 4.0 cylinder - 150,000 miles..cutting..3000 rpm
1994 Ford Ranger Pick Up 4.0 cylinder - 150,000 miles - bought used a couple of months ago and had never filled up until Friday. since filling it up when I drive about 5 to 8 miles it starts cutting o… read more
eauto
eauto
self employed
High School or GED
74 satisfied customers
2001 ford ranger: park and i rev the engine to 3000 rpm..fuel filter
I have a 2001 ford ranger 4.0 when in park and i rev the engine to 3000 rpm it starts cutting out. new fuel filter, plugs and wires. also when driveing at about 3000 rpms seems to have some valve chat… read more
Andy I
Andy I
Senior Master Technician
Associate Degree
226 satisfied customers
2001 ford ranger: driven..i revved it while in park..real bad
i have driven my recently purchased 2001 ford ranger with a 4.0 and it seemed fine. it was only short trips , probably not at very high rpms. but this afternoon, i revved it while in park to about 300… read more
kevin
kevin
Ford Tech
Vocational, Technical or Trade Scho
350 satisfied customers
97 Ford ranger: 4X4..drive,2nd or 1st acts like it is in nutral..rev.
97 Ford Ranger 4.0 Auto 4X4. Stuck in snow, now it does not go in drive,2nd or 1st acts like it is in nutral. will go in rev.… read more
Tim
Tim
Associate Degree
3,172 satisfied customers
2005 ford ranger: lt..4x4..u accelerate or rev up the motor it
i have a 2005 ford ranger 4.0 lt. 4x4 and i took it through some mud and a day after a ticking sound started when u accelerate or rev up the motor it is coming from the front around the fan and pulley… read more
BOBBYSS
BOBBYSS
TECHNICIAN/ADVISOR
Associate Degree
8,343 satisfied customers
93 ranger: starts right..revs..stalls and wont restart..scan tool
I have a 93 ranger 3.0 that starts right up and runs fine for a minute and then revs up to 3000 rpms. it then slows down and stalls and won't restart. Will run fine and drive with the scan tool hooked… read more
Anthony
Anthony
Master Automobile Technician
Vocational, Technical or Trade Scho
8,789 satisfied customers
1995 ford ranger: 3000 rpm..the timing..possible causes..air intake
My 1995 ford ranger will only idle at 3000 rpm give or take a couple hundred, i have tried the timing and it doesent seem to make one bit of diffrence. im looking for any other possible causes . i als… read more
Glenn
Glenn
Technician/Trainer
Vocational, Technical or Trade Scho
392 satisfied customers
2005 ford ranger: sohc..It just died, It will not turn over on its
I have a 2005 ford ranger with a 4.0 sohc. It just died, It will not turn over on it's own. If I hold down the fuel reset switch it will start and run(rough) and not go above 3000 rpm. when I let go o… read more
Kenny Z
Kenny Z
Ford Senior Master Technician
High School or GED
16 satisfied customers
nov 8th and ron told me to check the alternator..battery light
I asked the following question back on Nov 8th and Ron told me to check the alternator. I did had it replaced. That fixed the battery light. However at 3,000 rpm the motor still sputters and will not … read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
25,022 satisfied customers
2004 ford ranger: v6-when sitting..rev..sputter..problem somewhere
2004 ford ranger v6-when sitting still and I rev the engine it starts to spit and sputter and no power above 3000 rpms. Is this normal or is there a problem somewhere. I just replaced the altenator wi… read more
Wrenchtech
Wrenchtech
Vocational, Technical or Trade Scho
616 satisfied customers
2001 ford ranger: automatic..pops..rev..ideas?? could the maf do this?
I have a 2001 ford ranger 4.0 automatic. it pops when you get to about 3000rpms, almost sounds like a rev limiter. any ideas?? could the MAF do this? if so how do I test it?… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
53,348 satisfied customers
1993 Ford Ranger: 2wd..stalling at idle after 30-60 sec.
I have a 1993 Ford Ranger 4.0,auto,2wd,145k. It is stalling at idle after 30-60 sec. at light.… read more
HDGENE
HDGENE
Master Technician/Lead Technician
Associate Degree
2,835 satisfied customers
2001 ford ranger: v-6 3.0 liter motor..park..accelerating..rev
i have a 2001 ford ranger with v-6 3.0 liter motor .in park it only accelerates to 3000 rpm and stand breaking up .driving it is fine on accelerating . Is there and rev limiter on this engine .please … read more
Fordblue
Fordblue
High School or GED
22 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x