How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask NicksSticks Your Own Question
NicksSticks, ASE Certified Technician
Category: Ford
Satisfied Customers: 1425
Experience:  Ford Senior Master, Including Ford Diesel Master
Type Your Ford Question Here...
NicksSticks is online now
A new question is answered every 9 seconds

My 2008 6.4 diesel goesinto stall mode with a po234 code,

Customer Question

My 2008 6.4 diesel goesinto stall mode with a po234 code, excesive turbo pressure. How do I fix that issue ???
Submitted: 1 year ago.
Category: Ford
Expert:  NicksSticks replied 1 year ago.

Hi, do you have a programmer? if not, and no other codes, with engine cool, open the hood and see if you are able to move lever that controls turbo actuator. Lever connected to a motor connected to the turbo on the drivers side. Looks like a rod with little joints on each side. If this lever on the turbo moves nice back and forth, you likely have a failed ebp sensor which is attached to a small tube connected to the left exhaust manifold. Replace this and you should be fine.

Expert:  NicksSticks replied 1 year ago.

Hi, please let me know if you need any other help further, if not, positive ratings are always appreciated.