How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23821
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

2004 Ford Ford Freestar 4.2L
, The Computer was

Customer Question

Customer: 2004 Ford Ford Freestar 4.2L
JA: Thanks. Can you give me any more details about your issue?
Customer: The Computer was replaced by a Ford Dealership and the TSB for resealing was done. No issues until i put in a new battery recently. There is a high idle issue, codes came up regarding the Idle Air Control Module it was replaced and made no difference. Using a better reader it shows the fuel injector circuits are pretty much wide open. The van drives 60km/h without any input from the driver. Checked for vacuum leaks with soapy water and nothing was readily apparent
JA: OK got it. Last thing — JustAnswer charges a fee (generally around $28) to post your type of question to Ford Experts (you only pay if satisfied). There are a couple customers ahead of you. We can help you for less if you're not in a rush. Are you willing to wait a bit?
Customer: yes no problem
JA: OK. Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 1 year ago.
Category: Ford
Expert:  HDGENE replied 1 year ago.

Hello, so you had no issues until you replaced the battery, do you still have a code for the idle air control valve after replacing it and what was the code number that stored? How do you know the injector circuits are wide open?