How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Ford Tech -
Category: Ford
Satisfied Customers: 18866
Experience:  18+yrs experience. State Inspector & Ford Diagnostics/Repair
Type Your Ford Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

I have 1999 Crown Vic with 99,000 original miles. Recently

Customer Question

I have 1999 Crown Vic with 99,000 original miles. Recently my ABS light came on, code C1095. 2 questions, do you have any idea and can the ABS module be changed without draining the brake lines? Thanks
Submitted: 1 year ago.
Category: Ford
Expert:  Ron Z. replied 1 year ago.

When replacing the ABS Module, there is no need to "drain the brake lines". Disconnect the brake lines from the module and plug them to prevent brake fluid leakage. After module replacement, however, the system will need to be bled.

If my answer has helped you, please help me by leaving a rating using the stars at the top of this page or accept the answer so I may be credited. If you cannot rate or do not see the rating stars, please let me know. You can ask follow-up questions after you rate.